From 14a22f5b348e1b05d19f3bf05a56ea80730fcb10 Mon Sep 17 00:00:00 2001 From: Jason Stentz Date: Mon, 16 Feb 2026 17:09:31 -0500 Subject: [PATCH] removing jk bind --- init.lua | 1305 +++++++++++++++++++++++++++--------------------------- 1 file changed, 657 insertions(+), 648 deletions(-) diff --git a/init.lua b/init.lua index 5e782eeb..2ec18c93 100644 --- a/init.lua +++ b/init.lua @@ -1,9 +1,9 @@ -pcall(require, 'local.prehook') +pcall(require, "local.prehook") -- Set as the leader key -- See `:help mapleader` -vim.g.mapleader = ' ' -vim.g.maplocalleader = ' ' +vim.g.mapleader = " " +vim.g.maplocalleader = " " -- Set to true if you have a Nerd Font installed and selected in the terminal. vim.g.have_nerd_font = true @@ -15,12 +15,12 @@ vim.o.number = true vim.o.relativenumber = true -- Enable mouse mode -vim.o.mouse = 'a' +vim.o.mouse = "a" -- Don't show the mode, since it's already in the status line. vim.o.showmode = false -require 'clipboard' +require("clipboard") vim.o.breakindent = true @@ -29,7 +29,7 @@ vim.o.undofile = true vim.o.ignorecase = true vim.o.smartcase = true -vim.o.signcolumn = 'yes' +vim.o.signcolumn = "yes" vim.o.updatetime = 250 -- Decrease mapped sequence wait time @@ -48,10 +48,10 @@ vim.o.splitbelow = true -- See `:help lua-options` -- and `:help lua-options-guide` vim.o.list = true -vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' } +vim.opt.listchars = { tab = "» ", trail = "·", nbsp = "␣" } -- Preview substitutions live, as you type! -vim.o.inccommand = 'split' +vim.o.inccommand = "split" -- Show which line your cursor is on vim.o.cursorline = true @@ -65,7 +65,7 @@ vim.o.scrolloff = 10 vim.o.confirm = true -- Make all floating windows have a border. -vim.o.winborder = 'rounded' +vim.o.winborder = "rounded" -- Make the command status bar only appear when necessary. vim.o.cmdheight = 0 @@ -75,10 +75,10 @@ vim.o.cmdheight = 0 -- Clear highlights on search when pressing in normal mode. -- See `:help hlsearch` -vim.keymap.set('n', '', 'nohlsearch') +vim.keymap.set("n", "", "nohlsearch") -- Diagnostic keymaps -vim.keymap.set('n', 'q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' }) +vim.keymap.set("n", "q", vim.diagnostic.setloclist, { desc = "Open diagnostic [Q]uickfix list" }) -- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier -- for people to discover. Otherwise, you normally need to press , which @@ -86,7 +86,7 @@ vim.keymap.set('n', 'q', vim.diagnostic.setloclist, { desc = 'Open diagn -- -- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping -- or just use to exit terminal mode -vim.keymap.set('t', '', '', { desc = 'Exit terminal mode' }) +vim.keymap.set("t", "", "", { desc = "Exit terminal mode" }) -- TIP: Disable arrow keys in normal mode -- vim.keymap.set('n', '', 'echo "Use h to move!!"') @@ -98,20 +98,17 @@ vim.keymap.set('t', '', '', { desc = 'Exit terminal mode' } -- Use CTRL+ to switch between windows -- -- See `:help wincmd` for a list of all window commands -vim.keymap.set('n', '', '', { desc = 'Move focus to the left window' }) -vim.keymap.set('n', '', '', { desc = 'Move focus to the right window' }) -vim.keymap.set('n', '', '', { desc = 'Move focus to the lower window' }) -vim.keymap.set('n', '', '', { desc = 'Move focus to the upper window' }) - --- Exit insert mode easier -vim.keymap.set('i', 'jk', '', { desc = 'Exits insert mode' }) +vim.keymap.set("n", "", "", { desc = "Move focus to the left window" }) +vim.keymap.set("n", "", "", { desc = "Move focus to the right window" }) +vim.keymap.set("n", "", "", { desc = "Move focus to the lower window" }) +vim.keymap.set("n", "", "", { desc = "Move focus to the upper window" }) -- Keep cursor centered when navigating by half pages. -vim.keymap.set('n', '', 'zz', { desc = 'Move down by half a page and center the cursor' }) -vim.keymap.set('n', '', 'zz', { desc = 'Move down by half a page and center the cursor' }) +vim.keymap.set("n", "", "zz", { desc = "Move down by half a page and center the cursor" }) +vim.keymap.set("n", "", "zz", { desc = "Move down by half a page and center the cursor" }) -- Add the ability to paste over text without clobbering the paste register. -vim.keymap.set('x', 'p', '"_dP') +vim.keymap.set("x", "p", '"_dP') -- [[ Basic Autocommands ]] -- See `:help lua-guide-autocommands` @@ -119,30 +116,30 @@ vim.keymap.set('x', 'p', '"_dP') -- Highlight when yanking (copying) text -- Try it with `yap` in normal mode -- See `:help vim.hl.on_yank()` -vim.api.nvim_create_autocmd('TextYankPost', { - desc = 'Highlight when yanking (copying) text', - group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }), - callback = function() - vim.hl.on_yank() - end, +vim.api.nvim_create_autocmd("TextYankPost", { + desc = "Highlight when yanking (copying) text", + group = vim.api.nvim_create_augroup("kickstart-highlight-yank", { clear = true }), + callback = function() + vim.hl.on_yank() + end, }) local function opt_require(name) - local ok, mod = pcall(require, name) - if ok then - return mod - end + local ok, mod = pcall(require, name) + if ok then + return mod + end end -- [[ Install `lazy.nvim` plugin manager ]] -- See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info -local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim' +local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim" if not (vim.uv or vim.loop).fs_stat(lazypath) then - local lazyrepo = 'https://github.com/folke/lazy.nvim.git' - local out = vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath } - if vim.v.shell_error ~= 0 then - error('Error cloning lazy.nvim:\n' .. out) - end + local lazyrepo = "https://github.com/folke/lazy.nvim.git" + local out = vim.fn.system({ "git", "clone", "--filter=blob:none", "--branch=stable", lazyrepo, lazypath }) + if vim.v.shell_error ~= 0 then + error("Error cloning lazy.nvim:\n" .. out) + end end ---@type vim.Option @@ -160,674 +157,686 @@ rtp:prepend(lazypath) -- :Lazy update -- -- NOTE: Here is where you install your plugins. -require('lazy').setup({ - -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link). - { - 'NMAC427/guess-indent.nvim', -- Detect tabstop and shiftwidth automatically, - config = function() - require('guess-indent').setup {} - end, - }, +require("lazy").setup({ + -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link). + { + "NMAC427/guess-indent.nvim", -- Detect tabstop and shiftwidth automatically, + config = function() + require("guess-indent").setup({}) + end, + }, - -- NOTE: Plugins can also be added by using a table, - -- with the first argument being the link and the following - -- keys can be used to configure plugin behavior/loading/etc. - -- - -- Use `opts = {}` to automatically pass options to a plugin's `setup()` function, forcing the plugin to be loaded. - -- + -- NOTE: Plugins can also be added by using a table, + -- with the first argument being the link and the following + -- keys can be used to configure plugin behavior/loading/etc. + -- + -- Use `opts = {}` to automatically pass options to a plugin's `setup()` function, forcing the plugin to be loaded. + -- - -- Alternatively, use `config = function() ... end` for full control over the configuration. - -- If you prefer to call `setup` explicitly, use: - -- { - -- 'lewis6991/gitsigns.nvim', - -- config = function() - -- require('gitsigns').setup({ - -- -- Your gitsigns configuration here - -- }) - -- end, - -- } - -- - -- Here is a more advanced example where we pass configuration - -- options to `gitsigns.nvim`. - -- - -- See `:help gitsigns` to understand what the configuration keys do - { -- Adds git related signs to the gutter, as well as utilities for managing changes - 'lewis6991/gitsigns.nvim', - opts = { - signs = { - add = { text = '+' }, - change = { text = '~' }, - delete = { text = '_' }, - topdelete = { text = '‾' }, - changedelete = { text = '~' }, - }, - }, - }, + -- Alternatively, use `config = function() ... end` for full control over the configuration. + -- If you prefer to call `setup` explicitly, use: + -- { + -- 'lewis6991/gitsigns.nvim', + -- config = function() + -- require('gitsigns').setup({ + -- -- Your gitsigns configuration here + -- }) + -- end, + -- } + -- + -- Here is a more advanced example where we pass configuration + -- options to `gitsigns.nvim`. + -- + -- See `:help gitsigns` to understand what the configuration keys do + { -- Adds git related signs to the gutter, as well as utilities for managing changes + "lewis6991/gitsigns.nvim", + opts = { + signs = { + add = { text = "+" }, + change = { text = "~" }, + delete = { text = "_" }, + topdelete = { text = "‾" }, + changedelete = { text = "~" }, + }, + }, + }, - -- NOTE: Plugins can also be configured to run Lua code when they are loaded. - -- - -- This is often very useful to both group configuration, as well as handle - -- lazy loading plugins that don't need to be loaded immediately at startup. - -- - -- For example, in the following configuration, we use: - -- event = 'VimEnter' - -- - -- which loads which-key before all the UI elements are loaded. Events can be - -- normal autocommands events (`:help autocmd-events`). - -- - -- Then, because we use the `opts` key (recommended), the configuration runs - -- after the plugin has been loaded as `require(MODULE).setup(opts)`. + -- NOTE: Plugins can also be configured to run Lua code when they are loaded. + -- + -- This is often very useful to both group configuration, as well as handle + -- lazy loading plugins that don't need to be loaded immediately at startup. + -- + -- For example, in the following configuration, we use: + -- event = 'VimEnter' + -- + -- which loads which-key before all the UI elements are loaded. Events can be + -- normal autocommands events (`:help autocmd-events`). + -- + -- Then, because we use the `opts` key (recommended), the configuration runs + -- after the plugin has been loaded as `require(MODULE).setup(opts)`. - { -- Useful plugin to show you pending keybinds. - 'folke/which-key.nvim', - event = 'VimEnter', -- Sets the loading event to 'VimEnter' - opts = { - -- delay between pressing a key and opening which-key (milliseconds) - -- this setting is independent of vim.o.timeoutlen - delay = 250, - icons = { - -- set icon mappings to true if you have a Nerd Font - mappings = vim.g.have_nerd_font, - -- If you are using a Nerd Font: set icons.keys to an empty table which will use the - -- default which-key.nvim defined Nerd Font icons, otherwise define a string table - keys = vim.g.have_nerd_font and {} or { - Up = ' ', - Down = ' ', - Left = ' ', - Right = ' ', - C = ' ', - M = ' ', - D = ' ', - S = ' ', - CR = ' ', - Esc = ' ', - ScrollWheelDown = ' ', - ScrollWheelUp = ' ', - NL = ' ', - BS = ' ', - Space = ' ', - Tab = ' ', - F1 = '', - F2 = '', - F3 = '', - F4 = '', - F5 = '', - F6 = '', - F7 = '', - F8 = '', - F9 = '', - F10 = '', - F11 = '', - F12 = '', - }, - }, + { -- Useful plugin to show you pending keybinds. + "folke/which-key.nvim", + event = "VimEnter", -- Sets the loading event to 'VimEnter' + opts = { + -- delay between pressing a key and opening which-key (milliseconds) + -- this setting is independent of vim.o.timeoutlen + delay = 250, + icons = { + -- set icon mappings to true if you have a Nerd Font + mappings = vim.g.have_nerd_font, + -- If you are using a Nerd Font: set icons.keys to an empty table which will use the + -- default which-key.nvim defined Nerd Font icons, otherwise define a string table + keys = vim.g.have_nerd_font and {} or { + Up = " ", + Down = " ", + Left = " ", + Right = " ", + C = " ", + M = " ", + D = " ", + S = " ", + CR = " ", + Esc = " ", + ScrollWheelDown = " ", + ScrollWheelUp = " ", + NL = " ", + BS = " ", + Space = " ", + Tab = " ", + F1 = "", + F2 = "", + F3 = "", + F4 = "", + F5 = "", + F6 = "", + F7 = "", + F8 = "", + F9 = "", + F10 = "", + F11 = "", + F12 = "", + }, + }, - -- Document existing key chains - spec = { - { 's', group = '[S]earch' }, - { 't', group = '[T]oggle' }, - { 'h', group = 'Git [H]unk', mode = { 'n', 'v' } }, - }, - }, - }, + -- Document existing key chains + spec = { + { "s", group = "[S]earch" }, + { "t", group = "[T]oggle" }, + { "h", group = "Git [H]unk", mode = { "n", "v" } }, + }, + }, + }, - { -- Fuzzy Finder (files, lsp, etc) - 'nvim-telescope/telescope.nvim', - event = 'VimEnter', - dependencies = { - 'nvim-lua/plenary.nvim', - { -- If encountering errors, see telescope-fzf-native README for installation instructions - 'nvim-telescope/telescope-fzf-native.nvim', + { -- Fuzzy Finder (files, lsp, etc) + "nvim-telescope/telescope.nvim", + event = "VimEnter", + dependencies = { + "nvim-lua/plenary.nvim", + { -- If encountering errors, see telescope-fzf-native README for installation instructions + "nvim-telescope/telescope-fzf-native.nvim", - -- `build` is used to run some command when the plugin is installed/updated. - -- This is only run then, not every time Neovim starts up. - build = 'make', + -- `build` is used to run some command when the plugin is installed/updated. + -- This is only run then, not every time Neovim starts up. + build = "make", - -- `cond` is a condition used to determine whether this plugin should be - -- installed and loaded. - cond = function() - return vim.fn.executable 'make' == 1 - end, - }, - { 'nvim-telescope/telescope-ui-select.nvim' }, + -- `cond` is a condition used to determine whether this plugin should be + -- installed and loaded. + cond = function() + return vim.fn.executable("make") == 1 + end, + }, + { "nvim-telescope/telescope-ui-select.nvim" }, - -- Useful for getting pretty icons, but requires a Nerd Font. - { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font }, - }, - config = function() - -- Telescope is a fuzzy finder that comes with a lot of different things that - -- it can fuzzy find! It's more than just a "file finder", it can search - -- many different aspects of Neovim, your workspace, LSP, and more! - -- - -- The easiest way to use Telescope, is to start by doing something like: - -- :Telescope help_tags - -- - -- After running this command, a window will open up and you're able to - -- type in the prompt window. You'll see a list of `help_tags` options and - -- a corresponding preview of the help. - -- - -- Two important keymaps to use while in Telescope are: - -- - Insert mode: - -- - Normal mode: ? - -- - -- This opens a window that shows you all of the keymaps for the current - -- Telescope picker. This is really useful to discover what Telescope can - -- do as well as how to actually do it! + -- Useful for getting pretty icons, but requires a Nerd Font. + { "nvim-tree/nvim-web-devicons", enabled = vim.g.have_nerd_font }, + }, + config = function() + -- Telescope is a fuzzy finder that comes with a lot of different things that + -- it can fuzzy find! It's more than just a "file finder", it can search + -- many different aspects of Neovim, your workspace, LSP, and more! + -- + -- The easiest way to use Telescope, is to start by doing something like: + -- :Telescope help_tags + -- + -- After running this command, a window will open up and you're able to + -- type in the prompt window. You'll see a list of `help_tags` options and + -- a corresponding preview of the help. + -- + -- Two important keymaps to use while in Telescope are: + -- - Insert mode: + -- - Normal mode: ? + -- + -- This opens a window that shows you all of the keymaps for the current + -- Telescope picker. This is really useful to discover what Telescope can + -- do as well as how to actually do it! - -- [[ Configure Telescope ]] - -- See `:help telescope` and `:help telescope.setup()` - local overrides = opt_require 'local.overrides' or {} - local opts = { - extensions = { - ['ui-select'] = { - require('telescope.themes').get_dropdown(), - }, - }, - } - opts = vim.tbl_deep_extend('force', {}, opts, (overrides.telescope or {}).opts or {}) + -- [[ Configure Telescope ]] + -- See `:help telescope` and `:help telescope.setup()` + local overrides = opt_require("local.overrides") or {} + local opts = { + extensions = { + ["ui-select"] = { + require("telescope.themes").get_dropdown(), + }, + }, + } + opts = vim.tbl_deep_extend("force", {}, opts, (overrides.telescope or {}).opts or {}) - require('telescope').setup(opts) + require("telescope").setup(opts) - -- Enable Telescope extensions if they are installed - pcall(require('telescope').load_extension, 'fzf') - pcall(require('telescope').load_extension, 'ui-select') + -- Enable Telescope extensions if they are installed + pcall(require("telescope").load_extension, "fzf") + pcall(require("telescope").load_extension, "ui-select") - -- See `:help telescope.builtin` - local builtin = require 'telescope.builtin' - vim.keymap.set('n', 'sh', function() - builtin.find_files { hidden = true } - end, { desc = '[S]earch [H]idden Files' }) - vim.keymap.set('n', 'sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' }) - vim.keymap.set('n', 'sf', builtin.find_files, { desc = '[S]earch [F]iles' }) - vim.keymap.set('n', 'ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' }) - vim.keymap.set('n', 'sw', builtin.grep_string, { desc = '[S]earch current [W]ord' }) - vim.keymap.set('n', 'sg', builtin.live_grep, { desc = '[S]earch by [G]rep' }) - vim.keymap.set('n', 'sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' }) - vim.keymap.set('n', 'sr', builtin.resume, { desc = '[S]earch [R]esume' }) - vim.keymap.set('n', 's.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' }) - vim.keymap.set('n', '', builtin.buffers, { desc = '[ ] Find existing buffers' }) + -- See `:help telescope.builtin` + local builtin = require("telescope.builtin") + vim.keymap.set("n", "sh", function() + builtin.find_files({ hidden = true }) + end, { desc = "[S]earch [H]idden Files" }) + vim.keymap.set("n", "sk", builtin.keymaps, { desc = "[S]earch [K]eymaps" }) + vim.keymap.set("n", "sf", builtin.find_files, { desc = "[S]earch [F]iles" }) + vim.keymap.set("n", "ss", builtin.builtin, { desc = "[S]earch [S]elect Telescope" }) + vim.keymap.set("n", "sw", builtin.grep_string, { desc = "[S]earch current [W]ord" }) + vim.keymap.set("n", "sg", builtin.live_grep, { desc = "[S]earch by [G]rep" }) + vim.keymap.set("n", "sd", builtin.diagnostics, { desc = "[S]earch [D]iagnostics" }) + vim.keymap.set("n", "sr", builtin.resume, { desc = "[S]earch [R]esume" }) + vim.keymap.set("n", "s.", builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' }) + vim.keymap.set("n", "", builtin.buffers, { desc = "[ ] Find existing buffers" }) - -- Slightly advanced example of overriding default behavior and theme - vim.keymap.set('n', '/', function() - -- You can pass additional configuration to Telescope to change the theme, layout, etc. - builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown { - winblend = 10, - previewer = false, - }) - end, { desc = '[/] Fuzzily search in current buffer' }) + -- Slightly advanced example of overriding default behavior and theme + vim.keymap.set("n", "/", function() + -- You can pass additional configuration to Telescope to change the theme, layout, etc. + builtin.current_buffer_fuzzy_find(require("telescope.themes").get_dropdown({ + winblend = 10, + previewer = false, + })) + end, { desc = "[/] Fuzzily search in current buffer" }) - -- It's also possible to pass additional configuration options. - -- See `:help telescope.builtin.live_grep()` for information about particular keys - vim.keymap.set('n', 's/', function() - builtin.live_grep { - grep_open_files = true, - prompt_title = 'Live Grep in Open Files', - } - end, { desc = '[S]earch [/] in Open Files' }) + -- It's also possible to pass additional configuration options. + -- See `:help telescope.builtin.live_grep()` for information about particular keys + vim.keymap.set("n", "s/", function() + builtin.live_grep({ + grep_open_files = true, + prompt_title = "Live Grep in Open Files", + }) + end, { desc = "[S]earch [/] in Open Files" }) - -- Shortcut for searching your Neovim configuration files - vim.keymap.set('n', 'sn', function() - builtin.find_files { cwd = vim.fn.stdpath 'config', hidden = true, no_ignore = true } - end, { desc = '[S]earch [N]eovim files' }) - end, - }, + -- Shortcut for searching your Neovim configuration files + vim.keymap.set("n", "sn", function() + builtin.find_files({ cwd = vim.fn.stdpath("config"), hidden = true, no_ignore = true }) + end, { desc = "[S]earch [N]eovim files" }) + end, + }, - -- LSP Plugins - { - -- `lazydev` configures Lua LSP for your Neovim config, runtime and plugins - -- used for completion, annotations and signatures of Neovim apis - 'folke/lazydev.nvim', - ft = 'lua', - opts = { - library = { - -- Load luvit types when the `vim.uv` word is found - { path = '${3rd}/luv/library', words = { 'vim%.uv' } }, - }, - }, - }, - { - -- Main LSP Configuration - 'neovim/nvim-lspconfig', - dependencies = { - -- Automatically install LSPs and related tools to stdpath for Neovim - -- Mason must be loaded before its dependents so we need to set it up here. - { 'mason-org/mason.nvim', opts = {} }, + -- LSP Plugins + { + -- `lazydev` configures Lua LSP for your Neovim config, runtime and plugins + -- used for completion, annotations and signatures of Neovim apis + "folke/lazydev.nvim", + ft = "lua", + opts = { + library = { + -- Load luvit types when the `vim.uv` word is found + { path = "${3rd}/luv/library", words = { "vim%.uv" } }, + }, + }, + }, + { + -- Main LSP Configuration + "neovim/nvim-lspconfig", + dependencies = { + -- Automatically install LSPs and related tools to stdpath for Neovim + -- Mason must be loaded before its dependents so we need to set it up here. + { "mason-org/mason.nvim", opts = {} }, - -- Useful status updates for LSP. - { 'j-hui/fidget.nvim', opts = {} }, + -- Useful status updates for LSP. + { "j-hui/fidget.nvim", opts = {} }, - -- Allows extra capabilities provided by blink.cmp - 'saghen/blink.cmp', - }, - config = function() - vim.api.nvim_create_autocmd('LspAttach', { - group = vim.api.nvim_create_augroup('kickstart-lsp-attach', { clear = true }), - callback = function(event) - local map = function(keys, func, desc, mode) - mode = mode or 'n' - vim.keymap.set(mode, keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc }) - end + -- Allows extra capabilities provided by blink.cmp + "saghen/blink.cmp", + }, + config = function() + vim.api.nvim_create_autocmd("LspAttach", { + group = vim.api.nvim_create_augroup("kickstart-lsp-attach", { clear = true }), + callback = function(event) + local map = function(keys, func, desc, mode) + mode = mode or "n" + vim.keymap.set(mode, keys, func, { buffer = event.buf, desc = "LSP: " .. desc }) + end - -- Rename the variable under your cursor. - -- Most Language Servers support renaming across files, etc. - map('gn', vim.lsp.buf.rename, '[R]e[n]ame') + -- Rename the variable under your cursor. + -- Most Language Servers support renaming across files, etc. + map("gn", vim.lsp.buf.rename, "[R]e[n]ame") - -- Execute a code action, usually your cursor needs to be on top of an error - -- or a suggestion from your LSP for this to activate. - map('ga', vim.lsp.buf.code_action, '[G]oto Code [A]ction', { 'n', 'x' }) + -- Execute a code action, usually your cursor needs to be on top of an error + -- or a suggestion from your LSP for this to activate. + map("ga", vim.lsp.buf.code_action, "[G]oto Code [A]ction", { "n", "x" }) - -- Find references for the word under your cursor. - map('gr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences') + -- Find references for the word under your cursor. + map("gr", require("telescope.builtin").lsp_references, "[G]oto [R]eferences") - -- Jump to the implementation of the word under your cursor. - -- Useful when your language has ways of declaring types without an actual implementation. - map('gi', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation') + -- Jump to the implementation of the word under your cursor. + -- Useful when your language has ways of declaring types without an actual implementation. + map("gi", require("telescope.builtin").lsp_implementations, "[G]oto [I]mplementation") - -- Jump to the definition of the word under your cursor. - -- This is where a variable was first declared, or where a function is defined, etc. - -- To jump back, press . - map('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition') + -- Jump to the definition of the word under your cursor. + -- This is where a variable was first declared, or where a function is defined, etc. + -- To jump back, press . + map("gd", require("telescope.builtin").lsp_definitions, "[G]oto [D]efinition") - -- This is not Goto Definition, this is Goto Declaration. - -- For example, in C this would take you to the header. - map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration') + -- This is not Goto Definition, this is Goto Declaration. + -- For example, in C this would take you to the header. + map("gD", vim.lsp.buf.declaration, "[G]oto [D]eclaration") - -- Fuzzy find all the symbols in your current document. - -- Symbols are things like variables, functions, types, etc. - map('gO', require('telescope.builtin').lsp_document_symbols, 'Open Document Symbols') + -- Fuzzy find all the symbols in your current document. + -- Symbols are things like variables, functions, types, etc. + map("gO", require("telescope.builtin").lsp_document_symbols, "Open Document Symbols") - -- Fuzzy find all the symbols in your current workspace. - -- Similar to document symbols, except searches over your entire project. - map('gW', require('telescope.builtin').lsp_dynamic_workspace_symbols, 'Open Workspace Symbols') + -- Fuzzy find all the symbols in your current workspace. + -- Similar to document symbols, except searches over your entire project. + map("gW", require("telescope.builtin").lsp_dynamic_workspace_symbols, "Open Workspace Symbols") - -- Jump to the type of the word under your cursor. - -- Useful when you're not sure what type a variable is and you want to see - -- the definition of its *type*, not where it was *defined*. - map('gt', require('telescope.builtin').lsp_type_definitions, '[G]oto [T]ype Definition') + -- Jump to the type of the word under your cursor. + -- Useful when you're not sure what type a variable is and you want to see + -- the definition of its *type*, not where it was *defined*. + map("gt", require("telescope.builtin").lsp_type_definitions, "[G]oto [T]ype Definition") - -- This function resolves a difference between neovim nightly (version 0.11) and stable (version 0.10) - ---@param client vim.lsp.Client - ---@param method vim.lsp.protocol.Method - ---@param bufnr? integer some lsp support methods only in specific files - ---@return boolean - local function client_supports_method(client, method, bufnr) - if vim.fn.has 'nvim-0.11' == 1 then - return client:supports_method(method, bufnr) - else - return client.supports_method(method, { bufnr = bufnr }) - end - end + -- This function resolves a difference between neovim nightly (version 0.11) and stable (version 0.10) + ---@param client vim.lsp.Client + ---@param method vim.lsp.protocol.Method + ---@param bufnr? integer some lsp support methods only in specific files + ---@return boolean + local function client_supports_method(client, method, bufnr) + if vim.fn.has("nvim-0.11") == 1 then + return client:supports_method(method, bufnr) + else + return client.supports_method(method, { bufnr = bufnr }) + end + end - -- The following two autocommands are used to highlight references of the - -- word under your cursor when your cursor rests there for a little while. - -- See `:help CursorHold` for information about when this is executed - -- - -- When you move your cursor, the highlights will be cleared (the second autocommand). - local client = vim.lsp.get_client_by_id(event.data.client_id) - if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_documentHighlight, event.buf) then - local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false }) - vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, { - buffer = event.buf, - group = highlight_augroup, - callback = vim.lsp.buf.document_highlight, - }) + -- The following two autocommands are used to highlight references of the + -- word under your cursor when your cursor rests there for a little while. + -- See `:help CursorHold` for information about when this is executed + -- + -- When you move your cursor, the highlights will be cleared (the second autocommand). + local client = vim.lsp.get_client_by_id(event.data.client_id) + if + client + and client_supports_method( + client, + vim.lsp.protocol.Methods.textDocument_documentHighlight, + event.buf + ) + then + local highlight_augroup = + vim.api.nvim_create_augroup("kickstart-lsp-highlight", { clear = false }) + vim.api.nvim_create_autocmd({ "CursorHold", "CursorHoldI" }, { + buffer = event.buf, + group = highlight_augroup, + callback = vim.lsp.buf.document_highlight, + }) - vim.api.nvim_create_autocmd({ 'CursorMoved', 'CursorMovedI' }, { - buffer = event.buf, - group = highlight_augroup, - callback = vim.lsp.buf.clear_references, - }) + vim.api.nvim_create_autocmd({ "CursorMoved", "CursorMovedI" }, { + buffer = event.buf, + group = highlight_augroup, + callback = vim.lsp.buf.clear_references, + }) - vim.api.nvim_create_autocmd('LspDetach', { - group = vim.api.nvim_create_augroup('kickstart-lsp-detach', { clear = true }), - callback = function(event2) - vim.lsp.buf.clear_references() - vim.api.nvim_clear_autocmds { group = 'kickstart-lsp-highlight', buffer = event2.buf } - end, - }) - end + vim.api.nvim_create_autocmd("LspDetach", { + group = vim.api.nvim_create_augroup("kickstart-lsp-detach", { clear = true }), + callback = function(event2) + vim.lsp.buf.clear_references() + vim.api.nvim_clear_autocmds({ group = "kickstart-lsp-highlight", buffer = event2.buf }) + end, + }) + end - -- The following code creates a keymap to toggle inlay hints in your - -- code, if the language server you are using supports them - -- - -- This may be unwanted, since they displace some of your code - if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_inlayHint, event.buf) then - map('th', function() - vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled { bufnr = event.buf }) - end, '[T]oggle Inlay [H]ints') - end - end, - }) + -- The following code creates a keymap to toggle inlay hints in your + -- code, if the language server you are using supports them + -- + -- This may be unwanted, since they displace some of your code + if + client + and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_inlayHint, event.buf) + then + map("th", function() + vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled({ bufnr = event.buf })) + end, "[T]oggle Inlay [H]ints") + end + end, + }) - -- Diagnostic Config - -- See :help vim.diagnostic.Opts - vim.diagnostic.config { - severity_sort = true, - float = { border = 'rounded', source = 'if_many' }, - underline = { severity = vim.diagnostic.severity.ERROR }, - signs = vim.g.have_nerd_font and { - text = { - [vim.diagnostic.severity.ERROR] = '󰅚 ', - [vim.diagnostic.severity.WARN] = '󰀪 ', - [vim.diagnostic.severity.INFO] = '󰋽 ', - [vim.diagnostic.severity.HINT] = '󰌶 ', - }, - } or {}, - virtual_text = { - source = 'if_many', - spacing = 2, - format = function(diagnostic) - local diagnostic_message = { - [vim.diagnostic.severity.ERROR] = diagnostic.message, - [vim.diagnostic.severity.WARN] = diagnostic.message, - [vim.diagnostic.severity.INFO] = diagnostic.message, - [vim.diagnostic.severity.HINT] = diagnostic.message, - } - return diagnostic_message[diagnostic.severity] - end, - }, - } + -- Diagnostic Config + -- See :help vim.diagnostic.Opts + vim.diagnostic.config({ + severity_sort = true, + float = { border = "rounded", source = "if_many" }, + underline = { severity = vim.diagnostic.severity.ERROR }, + signs = vim.g.have_nerd_font and { + text = { + [vim.diagnostic.severity.ERROR] = "󰅚 ", + [vim.diagnostic.severity.WARN] = "󰀪 ", + [vim.diagnostic.severity.INFO] = "󰋽 ", + [vim.diagnostic.severity.HINT] = "󰌶 ", + }, + } or {}, + virtual_text = { + source = "if_many", + spacing = 2, + format = function(diagnostic) + local diagnostic_message = { + [vim.diagnostic.severity.ERROR] = diagnostic.message, + [vim.diagnostic.severity.WARN] = diagnostic.message, + [vim.diagnostic.severity.INFO] = diagnostic.message, + [vim.diagnostic.severity.HINT] = diagnostic.message, + } + return diagnostic_message[diagnostic.severity] + end, + }, + }) - -- LSP servers and clients are able to communicate to each other what features they support. - -- By default, Neovim doesn't support everything that is in the LSP specification. - -- When you add blink.cmp, luasnip, etc. Neovim now has *more* capabilities. - -- So, we create new capabilities with blink.cmp, and then broadcast that to the servers. - local capabilities = require('blink.cmp').get_lsp_capabilities() + -- LSP servers and clients are able to communicate to each other what features they support. + -- By default, Neovim doesn't support everything that is in the LSP specification. + -- When you add blink.cmp, luasnip, etc. Neovim now has *more* capabilities. + -- So, we create new capabilities with blink.cmp, and then broadcast that to the servers. + local capabilities = require("blink.cmp").get_lsp_capabilities() - -- Enable the following language servers - local servers = { - pyright = {}, - rust_analyzer = { - cmd = { 'rustup', 'run', 'stable', 'rust-analyzer' }, - }, - lua_ls = { - settings = { - Lua = { - completion = { - callSnippet = 'Replace', - }, - }, - }, - }, - } + -- Enable the following language servers + local servers = { + pyright = {}, + rust_analyzer = { + cmd = { "rustup", "run", "stable", "rust-analyzer" }, + }, + lua_ls = { + settings = { + Lua = { + completion = { + callSnippet = "Replace", + }, + }, + }, + }, + } - local servers_overrides = (opt_require 'local.overrides' or {}).lsp - servers = vim.tbl_deep_extend('force', {}, servers, servers_overrides or {}) + local servers_overrides = (opt_require("local.overrides") or {}).lsp + servers = vim.tbl_deep_extend("force", {}, servers, servers_overrides or {}) - -- Set up and enable servers. - for server_name, server_config in pairs(servers) do - server_config.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server_config.capabilities or {}) - vim.lsp.config(server_name, server_config) - vim.lsp.enable(server_name) - end - end, - }, + -- Set up and enable servers. + for server_name, server_config in pairs(servers) do + server_config.capabilities = + vim.tbl_deep_extend("force", {}, capabilities, server_config.capabilities or {}) + vim.lsp.config(server_name, server_config) + vim.lsp.enable(server_name) + end + end, + }, - { -- Autoformat - 'stevearc/conform.nvim', - event = { 'BufWritePre' }, - cmd = { 'ConformInfo' }, - keys = { - { - 'f', - function() - require('conform').format { async = true, lsp_format = 'fallback' } - end, - mode = '', - desc = '[F]ormat buffer', - }, - }, - opts = { - notify_on_error = false, - format_on_save = function(bufnr) - -- Disable "format_on_save lsp_fallback" for languages that don't - -- have a well standardized coding style. You can add additional - -- languages here or re-enable it for the disabled ones. - local disable_filetypes = { c = true, cpp = true } - if disable_filetypes[vim.bo[bufnr].filetype] then - return nil - else - return { - timeout_ms = 500, - lsp_format = 'fallback', - } - end - end, - formatters_by_ft = { - lua = { 'stylua' }, - rust = { 'rustfmt' }, - -- Conform can also run multiple formatters sequentially - -- python = { "isort", "black" }, - -- - -- You can use 'stop_after_first' to run the first available formatter from the list - -- javascript = { "prettierd", "prettier", stop_after_first = true }, - }, - }, - }, + { -- Autoformat + "stevearc/conform.nvim", + event = { "BufWritePre" }, + cmd = { "ConformInfo" }, + keys = { + { + "f", + function() + require("conform").format({ async = true, lsp_format = "fallback" }) + end, + mode = "", + desc = "[F]ormat buffer", + }, + }, + opts = { + notify_on_error = false, + format_on_save = function(bufnr) + -- Disable "format_on_save lsp_fallback" for languages that don't + -- have a well standardized coding style. You can add additional + -- languages here or re-enable it for the disabled ones. + local disable_filetypes = { c = true, cpp = true } + if disable_filetypes[vim.bo[bufnr].filetype] then + return nil + else + return { + timeout_ms = 500, + lsp_format = "fallback", + } + end + end, + formatters_by_ft = { + lua = { "stylua" }, + rust = { "rustfmt" }, + -- Conform can also run multiple formatters sequentially + -- python = { "isort", "black" }, + -- + -- You can use 'stop_after_first' to run the first available formatter from the list + -- javascript = { "prettierd", "prettier", stop_after_first = true }, + }, + }, + }, - { -- Autocompletion - 'saghen/blink.cmp', - event = 'VimEnter', - version = '1.*', - dependencies = { - -- Snippet Engine - { - 'L3MON4D3/LuaSnip', - version = '2.*', - build = (function() - -- Build Step is needed for regex support in snippets. - -- This step is not supported in many windows environments. - -- Remove the below condition to re-enable on windows. - if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then - return - end - return 'make install_jsregexp' - end)(), - dependencies = { - -- `friendly-snippets` contains a variety of premade snippets. - -- See the README about individual language/framework/plugin snippets: - -- https://github.com/rafamadriz/friendly-snippets - -- { - -- 'rafamadriz/friendly-snippets', - -- config = function() - -- require('luasnip.loaders.from_vscode').lazy_load() - -- end, - -- }, - }, - opts = {}, - }, - 'folke/lazydev.nvim', - }, - --- @module 'blink.cmp' - --- @type blink.cmp.Config - opts = { - keymap = { - -- 'default' (recommended) for mappings similar to built-in completions - -- to accept ([y]es) the completion. - -- This will auto-import if your LSP supports it. - -- This will expand snippets if the LSP sent a snippet. - -- 'super-tab' for tab to accept - -- 'enter' for enter to accept - -- 'none' for no mappings - -- - -- For an understanding of why the 'default' preset is recommended, - -- you will need to read `:help ins-completion` - -- - -- No, but seriously. Please read `:help ins-completion`, it is really good! - -- - -- All presets have the following mappings: - -- /: move to right/left of your snippet expansion - -- : Open menu or open docs if already open - -- / or /: Select next/previous item - -- : Hide menu - -- : Toggle signature help - -- - -- See :h blink-cmp-config-keymap for defining your own keymap - preset = 'default', + { -- Autocompletion + "saghen/blink.cmp", + event = "VimEnter", + version = "1.*", + dependencies = { + -- Snippet Engine + { + "L3MON4D3/LuaSnip", + version = "2.*", + build = (function() + -- Build Step is needed for regex support in snippets. + -- This step is not supported in many windows environments. + -- Remove the below condition to re-enable on windows. + if vim.fn.has("win32") == 1 or vim.fn.executable("make") == 0 then + return + end + return "make install_jsregexp" + end)(), + dependencies = { + -- `friendly-snippets` contains a variety of premade snippets. + -- See the README about individual language/framework/plugin snippets: + -- https://github.com/rafamadriz/friendly-snippets + -- { + -- 'rafamadriz/friendly-snippets', + -- config = function() + -- require('luasnip.loaders.from_vscode').lazy_load() + -- end, + -- }, + }, + opts = {}, + }, + "folke/lazydev.nvim", + }, + --- @module 'blink.cmp' + --- @type blink.cmp.Config + opts = { + keymap = { + -- 'default' (recommended) for mappings similar to built-in completions + -- to accept ([y]es) the completion. + -- This will auto-import if your LSP supports it. + -- This will expand snippets if the LSP sent a snippet. + -- 'super-tab' for tab to accept + -- 'enter' for enter to accept + -- 'none' for no mappings + -- + -- For an understanding of why the 'default' preset is recommended, + -- you will need to read `:help ins-completion` + -- + -- No, but seriously. Please read `:help ins-completion`, it is really good! + -- + -- All presets have the following mappings: + -- /: move to right/left of your snippet expansion + -- : Open menu or open docs if already open + -- / or /: Select next/previous item + -- : Hide menu + -- : Toggle signature help + -- + -- See :h blink-cmp-config-keymap for defining your own keymap + preset = "default", - -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see: - -- https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps - }, + -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see: + -- https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps + }, - appearance = { - -- 'mono' (default) for 'Nerd Font Mono' or 'normal' for 'Nerd Font' - -- Adjusts spacing to ensure icons are aligned - nerd_font_variant = 'mono', - }, + appearance = { + -- 'mono' (default) for 'Nerd Font Mono' or 'normal' for 'Nerd Font' + -- Adjusts spacing to ensure icons are aligned + nerd_font_variant = "mono", + }, - completion = { - -- By default, you may press `` to show the documentation. - -- Optionally, set `auto_show = true` to show the documentation after a delay. - documentation = { auto_show = false, auto_show_delay_ms = 500 }, - }, + completion = { + -- By default, you may press `` to show the documentation. + -- Optionally, set `auto_show = true` to show the documentation after a delay. + documentation = { auto_show = false, auto_show_delay_ms = 500 }, + }, - sources = { - default = { 'lsp', 'path', 'snippets', 'lazydev' }, - providers = { - lazydev = { module = 'lazydev.integrations.blink', score_offset = 100 }, - }, - }, + sources = { + default = { "lsp", "path", "snippets", "lazydev" }, + providers = { + lazydev = { module = "lazydev.integrations.blink", score_offset = 100 }, + }, + }, - snippets = { preset = 'luasnip' }, + snippets = { preset = "luasnip" }, - -- Blink.cmp includes an optional, recommended rust fuzzy matcher, - -- which automatically downloads a prebuilt binary when enabled. - -- - -- By default, we use the Lua implementation instead, but you may enable - -- the rust implementation via `'prefer_rust_with_warning'` - -- - -- See :h blink-cmp-config-fuzzy for more information - fuzzy = { implementation = 'prefer_rust_with_warning' }, + -- Blink.cmp includes an optional, recommended rust fuzzy matcher, + -- which automatically downloads a prebuilt binary when enabled. + -- + -- By default, we use the Lua implementation instead, but you may enable + -- the rust implementation via `'prefer_rust_with_warning'` + -- + -- See :h blink-cmp-config-fuzzy for more information + fuzzy = { implementation = "prefer_rust_with_warning" }, - -- Shows a signature help window while you type arguments for a function - signature = { enabled = true }, - }, - }, - { - 'catppuccin/nvim', - name = 'catppuccin', - priority = 1000, - config = function() - require('catppuccin').setup { - float = { - transparent = false, - solid = false, - }, - auto_integrations = true, - } - vim.cmd.colorscheme 'catppuccin-mocha' - end, - }, - -- Highlight todo, notes, etc in comments - { - 'folke/todo-comments.nvim', - event = 'VimEnter', - dependencies = { 'nvim-lua/plenary.nvim' }, - opts = { signs = false }, - }, + -- Shows a signature help window while you type arguments for a function + signature = { enabled = true }, + }, + }, + { + "catppuccin/nvim", + name = "catppuccin", + priority = 1000, + config = function() + require("catppuccin").setup({ + float = { + transparent = false, + solid = false, + }, + auto_integrations = true, + }) + vim.cmd.colorscheme("catppuccin-mocha") + end, + }, + -- Highlight todo, notes, etc in comments + { + "folke/todo-comments.nvim", + event = "VimEnter", + dependencies = { "nvim-lua/plenary.nvim" }, + opts = { signs = false }, + }, - { -- Collection of various small independent plugins/modules - 'echasnovski/mini.nvim', - config = function() - -- Better Around/Inside textobjects - -- - -- Examples: - -- - va) - [V]isually select [A]round [)]paren - -- - yinq - [Y]ank [I]nside [N]ext [Q]uote - -- - ci' - [C]hange [I]nside [']quote - require('mini.ai').setup { n_lines = 500 } + { -- Collection of various small independent plugins/modules + "echasnovski/mini.nvim", + config = function() + -- Better Around/Inside textobjects + -- + -- Examples: + -- - va) - [V]isually select [A]round [)]paren + -- - yinq - [Y]ank [I]nside [N]ext [Q]uote + -- - ci' - [C]hange [I]nside [']quote + require("mini.ai").setup({ n_lines = 500 }) - -- Add/delete/replace surroundings (brackets, quotes, etc.) - -- - -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren - -- - sd' - [S]urround [D]elete [']quotes - -- - sr)' - [S]urround [R]eplace [)] ['] - require('mini.surround').setup() + -- Add/delete/replace surroundings (brackets, quotes, etc.) + -- + -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren + -- - sd' - [S]urround [D]elete [']quotes + -- - sr)' - [S]urround [R]eplace [)] ['] + require("mini.surround").setup() - -- Simple and easy statusline. - -- You could remove this setup call if you don't like it, - -- and try some other statusline plugin - local statusline = require 'mini.statusline' - -- set use_icons to true if you have a Nerd Font - statusline.setup { use_icons = vim.g.have_nerd_font } + -- Simple and easy statusline. + -- You could remove this setup call if you don't like it, + -- and try some other statusline plugin + local statusline = require("mini.statusline") + -- set use_icons to true if you have a Nerd Font + statusline.setup({ use_icons = vim.g.have_nerd_font }) - -- You can configure sections in the statusline by overriding their - -- default behavior. For example, here we set the section for - -- cursor location to LINE:COLUMN - ---@diagnostic disable-next-line: duplicate-set-field - statusline.section_location = function() - return '%2l:%-2v' - end + -- You can configure sections in the statusline by overriding their + -- default behavior. For example, here we set the section for + -- cursor location to LINE:COLUMN + ---@diagnostic disable-next-line: duplicate-set-field + statusline.section_location = function() + return "%2l:%-2v" + end - -- ... and there is more! - -- Check out: https://github.com/echasnovski/mini.nvim - end, - }, - { -- Highlight, edit, and navigate code - 'nvim-treesitter/nvim-treesitter', - build = ':TSUpdate', - lazy = false, - -- There are additional nvim-treesitter modules that you can use to interact - -- with nvim-treesitter. You should go explore a few and see what interests you: - -- - -- - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod` - -- - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context - -- - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects - config = function() - -- Auto start treesitter if a parser is available. - vim.api.nvim_create_autocmd('FileType', { - callback = function(args) - local ft = vim.bo[args.buf].filetype - -- TODO: add a file type to lang mapper here - local lang = ft + -- ... and there is more! + -- Check out: https://github.com/echasnovski/mini.nvim + end, + }, + { -- Highlight, edit, and navigate code + "nvim-treesitter/nvim-treesitter", + build = ":TSUpdate", + lazy = false, + -- There are additional nvim-treesitter modules that you can use to interact + -- with nvim-treesitter. You should go explore a few and see what interests you: + -- + -- - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod` + -- - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context + -- - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects + config = function() + -- Auto start treesitter if a parser is available. + vim.api.nvim_create_autocmd("FileType", { + callback = function(args) + local ft = vim.bo[args.buf].filetype + -- TODO: add a file type to lang mapper here + local lang = ft - -- Only start if a parser exists - if vim.treesitter.language.get_lang(lang) then - pcall(vim.treesitter.start, args.buf, lang) - end - end, - }) - end, - }, + -- Only start if a parser exists + if vim.treesitter.language.get_lang(lang) then + pcall(vim.treesitter.start, args.buf, lang) + end + end, + }) + end, + }, - require 'kickstart.plugins.neo-tree', - require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps - require 'kickstart.plugins.autopairs', + require("kickstart.plugins.neo-tree"), + require("kickstart.plugins.gitsigns"), -- adds gitsigns recommend keymaps + require("kickstart.plugins.autopairs"), - -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua` - -- This is the easiest way to modularize your config. - -- - -- Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going. - { import = 'custom.plugins' }, - { import = 'local.plugins' }, - -- - -- For additional information with loading, sourcing and examples see `:help lazy.nvim-🔌-plugin-spec` - -- Or use telescope! - -- In normal mode type `sh` then write `lazy.nvim-plugin` - -- you can continue same window with `sr` which resumes last telescope search + -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua` + -- This is the easiest way to modularize your config. + -- + -- Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going. + { import = "custom.plugins" }, + { import = "local.plugins" }, + -- + -- For additional information with loading, sourcing and examples see `:help lazy.nvim-🔌-plugin-spec` + -- Or use telescope! + -- In normal mode type `sh` then write `lazy.nvim-plugin` + -- you can continue same window with `sr` which resumes last telescope search }, { - ui = { - -- If you are using a Nerd Font: set icons to an empty table which will use the - -- default lazy.nvim defined Nerd Font icons, otherwise define a unicode icons table - icons = vim.g.have_nerd_font and {} or { - cmd = '⌘', - config = '🛠', - event = '📅', - ft = '📂', - init = '⚙', - keys = '🗝', - plugin = '🔌', - runtime = '💻', - require = '🌙', - source = '📄', - start = '🚀', - task = '📌', - lazy = '💤 ', - }, - }, + ui = { + -- If you are using a Nerd Font: set icons to an empty table which will use the + -- default lazy.nvim defined Nerd Font icons, otherwise define a unicode icons table + icons = vim.g.have_nerd_font and {} or { + cmd = "⌘", + config = "🛠", + event = "📅", + ft = "📂", + init = "⚙", + keys = "🗝", + plugin = "🔌", + runtime = "💻", + require = "🌙", + source = "📄", + start = "🚀", + task = "📌", + lazy = "💤 ", + }, + }, }) -pcall(require, 'local.posthook') +pcall(require, "local.posthook") -- The line beneath this is called `modeline`. See `:help modeline` -- vim: ts=2 sts=2 sw=2 et