init change

init.lua

@@ -1,89 +1,3 @@
---[[
-
-=====================================================================
-==================== READ THIS BEFORE CONTINUING ====================
-=====================================================================
-========                                    .-----.          ========
-========         .----------------------.   | === |          ========
-========         |.-""""""""""""""""""-.|   |-----|          ========
-========         ||                    ||   | === |          ========
-========         ||   KICKSTART.NVIM   ||   |-----|          ========
-========         ||                    ||   | === |          ========
-========         ||                    ||   |-----|          ========
-========         ||:Tutor              ||   |:::::|          ========
-========         |'-..................-'|   |____o|          ========
-========         `"")----------------(""`   ___________      ========
-========        /::::::::::|  |::::::::::\  \ no mouse \     ========
-========       /:::========|  |==hjkl==:::\  \ required \    ========
-========      '""""""""""""'  '""""""""""""'  '""""""""""'   ========
-========                                                     ========
-=====================================================================
-=====================================================================
-
-What is Kickstart?
-
-  Kickstart.nvim is *not* a distribution.
-
-  Kickstart.nvim is a starting point for your own configuration.
-    The goal is that you can read every line of code, top-to-bottom, understand
-    what your configuration is doing, and modify it to suit your needs.
-
-    Once you've done that, you can start exploring, configuring and tinkering to
-    make Neovim your own! That might mean leaving Kickstart just the way it is for a while
-    or immediately breaking it into modular pieces. It's up to you!
-
-    If you don't know anything about Lua, I recommend taking some time to read through
-    a guide. One possible example which will only take 10-15 minutes:
-      - https://learnxinyminutes.com/docs/lua/
-
-    After understanding a bit more about Lua, you can use `:help lua-guide` as a
-    reference for how Neovim integrates Lua.
-    - :help lua-guide
-    - (or HTML version): https://neovim.io/doc/user/lua-guide.html
-
-Kickstart Guide:
-
-  TODO: The very first thing you should do is to run the command `:Tutor` in Neovim.
-
-    If you don't know what this means, type the following:
-      - <escape key>
-      - :
-      - Tutor
-      - <enter key>
-
-    (If you already know the Neovim basics, you can skip this step.)
-
-  Once you've completed that, you can continue working through **AND READING** the rest
-  of the kickstart init.lua.
-
-  Next, run AND READ `:help`.
-    This will open up a help window with some basic information
-    about reading, navigating and searching the builtin help documentation.
-
-    This should be the first place you go to look when you're stuck or confused
-    with something. It's one of my favorite Neovim features.
-
-    MOST IMPORTANTLY, we provide a keymap "<space>sh" to [s]earch the [h]elp documentation,
-    which is very useful when you're not exactly sure of what you're looking for.
-
-  I have left several `:help X` comments throughout the init.lua
-    These are hints about where to find more information about the relevant settings,
-    plugins or Neovim features used in Kickstart.
-
-   NOTE: Look for lines like this
-
-    Throughout the file. These are for you, the reader, to help you understand what is happening.
-    Feel free to delete them once you know what you're doing, but they should serve as a guide
-    for when you are first encountering a few different constructs in your Neovim config.
-
-If you experience any errors while trying to install kickstart, run `:checkhealth` for more info.
-
-I hope you enjoy your Neovim journey,
-- TJ
-
-P.S. You can delete this when you're done too. It's your config now! :)
---]]
-
 -- Set <space> as the leader key
 -- See `:help mapleader`
 --  NOTE: Must happen before plugins are loaded (otherwise wrong leader will be used)
@@ -91,7 +5,7 @@ vim.g.mapleader = ' '
 vim.g.maplocalleader = ' '
 
 -- Set to true if you have a Nerd Font installed and selected in the terminal
-vim.g.have_nerd_font = false
+vim.g.have_nerd_font = true
 
 -- [[ Setting options ]]
 -- See `:help vim.opt`
@@ -102,7 +16,7 @@ vim.g.have_nerd_font = false
 vim.opt.number = true
 -- You can also add relative line numbers, to help with jumping.
 --  Experiment for yourself to see if you like it!
--- vim.opt.relativenumber = true
+vim.opt.relativenumber = true
 
 -- Enable mouse mode, can be useful for resizing splits for example!
 vim.opt.mouse = 'a'
@@ -175,11 +89,8 @@ vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagn
 -- or just use <C-\><C-n> to exit terminal mode
 vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })
 
--- TIP: Disable arrow keys in normal mode
+--NVIM Tree
--- vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
+vim.keymap.set('n', '<leader>e', '<cmd>NvimTreeToggle<CR>')
--- vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
--- vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
--- vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')
 
 -- Keybinds to make split navigation easier.
 --  Use CTRL+<hjkl> to switch between windows
@@ -255,6 +166,17 @@ require('lazy').setup({
       },
     },
   },
+  {
+    'nvim-tree/nvim-tree.lua',
+    version = '*',
+    lazy = false,
+    dependencies = {
+      'nvim-tree/nvim-web-devicons',
+    },
+    config = function()
+      require('nvim-tree').setup {}
+    end,
+  },
 
   -- NOTE: Plugins can also be configured to run Lua code when they are loaded.
   --
@@ -274,7 +196,8 @@ require('lazy').setup({
   { -- Useful plugin to show you pending keybinds.
     'folke/which-key.nvim',
     event = 'VimEnter', -- Sets the loading event to 'VimEnter'
-    opts = {
+    config = function() -- This is the function that runs, AFTER loading
+      require('which-key').setup {
         icons = {
           -- set icon mappings to true if you have a Nerd Font
           mappings = vim.g.have_nerd_font,
@@ -311,9 +234,10 @@ require('lazy').setup({
             F12 = '<F12>',
           },
         },
+      }
 
       -- Document existing key chains
-      spec = {
+      require('which-key').add {
         { '<leader>c', group = '[C]ode', mode = { 'n', 'x' } },
         { '<leader>d', group = '[D]ocument' },
         { '<leader>r', group = '[R]ename' },
@@ -321,8 +245,8 @@ require('lazy').setup({
         { '<leader>w', group = '[W]orkspace' },
         { '<leader>t', group = '[T]oggle' },
         { '<leader>h', group = 'Git [H]unk', mode = { 'n', 'v' } },
-      },
+      }
-    },
+    end,
   },
 
   -- NOTE: Plugins can specify dependencies.
@@ -605,9 +529,9 @@ require('lazy').setup({
       --  - settings (table): Override the default settings passed when initializing the server.
       --        For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/
       local servers = {
-        -- clangd = {},
+        clangd = {},
         -- gopls = {},
-        -- pyright = {},
+        pyright = {},
         -- rust_analyzer = {},
         -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs
         --
@@ -647,6 +571,7 @@ require('lazy').setup({
       local ensure_installed = vim.tbl_keys(servers or {})
       vim.list_extend(ensure_installed, {
         'stylua', -- Used to format Lua code
+        'clang-format',
       })
       require('mason-tool-installer').setup { ensure_installed = ensure_installed }
 
@@ -673,7 +598,7 @@ require('lazy').setup({
       {
         '<leader>f',
         function()
-          require('conform').format { async = true, lsp_format = 'fallback' }
+          require('conform').format { async = true, lsp_fallback = true }
         end,
         mode = '',
         desc = '[F]ormat buffer',
@@ -686,15 +611,9 @@ require('lazy').setup({
         -- have a well standardized coding style. You can add additional
         -- languages here or re-enable it for the disabled ones.
         local disable_filetypes = { c = true, cpp = true }
-        local lsp_format_opt
-        if disable_filetypes[vim.bo[bufnr].filetype] then
-          lsp_format_opt = 'never'
-        else
-          lsp_format_opt = 'fallback'
-        end
         return {
           timeout_ms = 500,
-          lsp_format = lsp_format_opt,
+          lsp_fallback = not disable_filetypes[vim.bo[bufnr].filetype],
         }
       end,
       formatters_by_ft = {
@@ -779,9 +698,9 @@ require('lazy').setup({
 
           -- If you prefer more traditional completion keymaps,
           -- you can uncomment the following lines
-          --['<CR>'] = cmp.mapping.confirm { select = true },
+          ['<CR>'] = cmp.mapping.confirm { select = true },
-          --['<Tab>'] = cmp.mapping.select_next_item(),
+          ['<Tab>'] = cmp.mapping.select_next_item(),
-          --['<S-Tab>'] = cmp.mapping.select_prev_item(),
+          ['<S-Tab>'] = cmp.mapping.select_prev_item(),
 
           -- Manually trigger a completion from nvim-cmp.
           --  Generally you don't need this, because nvim-cmp will display