stopper TS auto install(breaks vue) and enabled nerd fonts

init.lua

@@ -87,11 +87,11 @@ P.S. You can delete this when you're done too. It's your config now! :)
 -- Set <space> as the leader key
 -- See `:help mapleader`
 --  NOTE: Must happen before plugins are loaded (otherwise wrong leader will be used)
-vim.g.mapleader = ' '
+vim.g.mapleader = " "
-vim.g.maplocalleader = ' '
+vim.g.maplocalleader = " "
 
 -- Set to true if you have a Nerd Font installed and selected in the terminal
-vim.g.have_nerd_font = false
+vim.g.have_nerd_font = true
 
 -- [[ Setting options ]]
 -- See `:help vim.opt`
@@ -105,7 +105,7 @@ vim.opt.number = true
 -- vim.opt.relativenumber = true
 
 -- Enable mouse mode, can be useful for resizing splits for example!
-vim.opt.mouse = 'a'
+vim.opt.mouse = "a"
 
 -- Don't show the mode, since it's already in the status line
 vim.opt.showmode = false
@@ -126,7 +126,7 @@ vim.opt.showmode = false
 --   },
 --   cache_enabled = 0,
 -- }
-vim.opt.clipboard = 'unnamedplus'
+vim.opt.clipboard = "unnamedplus"
 
 -- Enable break indent
 vim.opt.breakindent = true
@@ -139,7 +139,7 @@ vim.opt.ignorecase = true
 vim.opt.smartcase = true
 
 -- Keep signcolumn on by default
-vim.opt.signcolumn = 'yes'
+vim.opt.signcolumn = "yes"
 
 -- Decrease update time
 vim.opt.updatetime = 250
@@ -156,10 +156,10 @@ vim.opt.splitbelow = true
 --  See `:help 'list'`
 --  and `:help 'listchars'`
 vim.opt.list = true
-vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' }
+vim.opt.listchars = { tab = "» ", trail = "·", nbsp = "␣" }
 
 -- Preview substitutions live, as you type!
-vim.opt.inccommand = 'split'
+vim.opt.inccommand = "split"
 
 -- Show which line your cursor is on
 vim.opt.cursorline = true
@@ -169,20 +169,20 @@ vim.opt.scrolloff = 10
 
 -- [[ Basic Keymaps ]]
 --  See `:help vim.keymap.set()`
-vim.keymap.set('n', '<leader>y', '"+y')
+vim.keymap.set("n", "<leader>y", '"+y')
-vim.keymap.set('n', '<leader>p', '"+p')
+vim.keymap.set("n", "<leader>p", '"+p')
-vim.keymap.set('v', '<leader>y', '"+y')
+vim.keymap.set("v", "<leader>y", '"+y')
-vim.keymap.set('v', '<leader>p', '"+p')
+vim.keymap.set("v", "<leader>p", '"+p')
 
 -- Set highlight on search, but clear on pressing <Esc> in normal mode
 vim.opt.hlsearch = true
-vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')
+vim.keymap.set("n", "<Esc>", "<cmd>nohlsearch<CR>")
 
 -- Diagnostic keymaps
-vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous [D]iagnostic message' })
+vim.keymap.set("n", "[d", vim.diagnostic.goto_prev, { desc = "Go to previous [D]iagnostic message" })
-vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next [D]iagnostic message' })
+vim.keymap.set("n", "]d", vim.diagnostic.goto_next, { desc = "Go to next [D]iagnostic message" })
-vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = 'Show diagnostic [E]rror messages' })
+vim.keymap.set("n", "<leader>e", vim.diagnostic.open_float, { desc = "Show diagnostic [E]rror messages" })
-vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })
+vim.keymap.set("n", "<leader>q", vim.diagnostic.setloclist, { desc = "Open diagnostic [Q]uickfix list" })
 
 -- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
 -- for people to discover. Otherwise, you normally need to press <C-\><C-n>, which
@@ -190,7 +190,7 @@ vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagn
 --
 -- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping
 -- or just use <C-\><C-n> to exit terminal mode
-vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })
+vim.keymap.set("t", "<Esc><Esc>", "<C-\\><C-n>", { desc = "Exit terminal mode" })
 
 -- TIP: Disable arrow keys in normal mode
 -- vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
@@ -202,10 +202,10 @@ vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' }
 --  Use CTRL+<hjkl> to switch between windows
 --
 --  See `:help wincmd` for a list of all window commands
-vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' })
+vim.keymap.set("n", "<C-h>", "<C-w><C-h>", { desc = "Move focus to the left window" })
-vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' })
+vim.keymap.set("n", "<C-l>", "<C-w><C-l>", { desc = "Move focus to the right window" })
-vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
+vim.keymap.set("n", "<C-j>", "<C-w><C-j>", { desc = "Move focus to the lower window" })
-vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })
+vim.keymap.set("n", "<C-k>", "<C-w><C-k>", { desc = "Move focus to the upper window" })
 
 -- [[ Basic Autocommands ]]
 --  See `:help lua-guide-autocommands`
@@ -213,20 +213,18 @@ vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper win
 -- Highlight when yanking (copying) text
 --  Try it with `yap` in normal mode
 --  See `:help vim.highlight.on_yank()`
-vim.api.nvim_create_autocmd('TextYankPost', {
+vim.api.nvim_create_autocmd("TextYankPost", {
-  desc = 'Highlight when yanking (copying) text',
+  desc = "Highlight when yanking (copying) text",
-  group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }),
+  group = vim.api.nvim_create_augroup("kickstart-highlight-yank", { clear = true }),
-  callback = function()
+  callback = function() vim.highlight.on_yank() end,
-    vim.highlight.on_yank()
-  end,
 })
 
 -- [[ Install `lazy.nvim` plugin manager ]]
 --    See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info
-local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
+local lazypath = vim.fn.stdpath "data" .. "/lazy/lazy.nvim"
 if not vim.loop.fs_stat(lazypath) then
-  local lazyrepo = 'https://github.com/folke/lazy.nvim.git'
+  local lazyrepo = "https://github.com/folke/lazy.nvim.git"
-  vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
+  vim.fn.system { "git", "clone", "--filter=blob:none", "--branch=stable", lazyrepo, lazypath }
 end ---@diagnostic disable-next-line: undefined-field
 vim.opt.rtp:prepend(lazypath)
 
@@ -241,9 +239,9 @@ vim.opt.rtp:prepend(lazypath)
 --    :Lazy update
 --
 -- NOTE: Here is where you install your plugins.
-require('lazy').setup({
+require("lazy").setup({
   -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link).
-  'tpope/vim-sleuth', -- Detect tabstop and shiftwidth automatically
+  "tpope/vim-sleuth", -- Detect tabstop and shiftwidth automatically
 
   -- NOTE: Plugins can also be added by using a table,
   -- with the first argument being the link and the following
@@ -255,7 +253,7 @@ require('lazy').setup({
   --    require('Comment').setup({})
 
   -- "gc" to comment visual regions/lines
-  { 'numToStr/Comment.nvim',    opts = {} },
+  { "numToStr/Comment.nvim", opts = {} },
 
   -- Here is a more advanced example where we pass configuration
   -- options to `gitsigns.nvim`. This is equivalent to the following Lua:
@@ -263,14 +261,14 @@ require('lazy').setup({
   --
   -- See `:help gitsigns` to understand what the configuration keys do
   { -- Adds git related signs to the gutter, as well as utilities for managing changes
-    'lewis6991/gitsigns.nvim',
+    "lewis6991/gitsigns.nvim",
     opts = {
       signs = {
-        add = { text = '+' },
+        add = { text = "+" },
-        change = { text = '~' },
+        change = { text = "~" },
-        delete = { text = '_' },
+        delete = { text = "_" },
-        topdelete = { text = '‾' },
+        topdelete = { text = "‾" },
-        changedelete = { text = '~' },
+        changedelete = { text = "~" },
       },
     },
   },
@@ -290,26 +288,26 @@ require('lazy').setup({
   -- after the plugin has been loaded:
   --  config = function() ... end
 
-  {                     -- Useful plugin to show you pending keybinds.
+  { -- Useful plugin to show you pending keybinds.
-    'folke/which-key.nvim',
+    "folke/which-key.nvim",
-    event = 'VimEnter', -- Sets the loading event to 'VimEnter'
+    event = "VimEnter", -- Sets the loading event to 'VimEnter'
     config = function() -- This is the function that runs, AFTER loading
-      require('which-key').setup()
+      require("which-key").setup()
 
       -- Document existing key chains
-      require('which-key').register {
+      require("which-key").register {
-        ['<leader>c'] = { name = '[C]ode', _ = 'which_key_ignore' },
+        ["<leader>c"] = { name = "[C]ode", _ = "which_key_ignore" },
-        ['<leader>d'] = { name = '[D]ocument', _ = 'which_key_ignore' },
+        ["<leader>d"] = { name = "[D]ocument", _ = "which_key_ignore" },
-        ['<leader>r'] = { name = '[R]ename', _ = 'which_key_ignore' },
+        ["<leader>r"] = { name = "[R]ename", _ = "which_key_ignore" },
-        ['<leader>s'] = { name = '[S]earch', _ = 'which_key_ignore' },
+        ["<leader>s"] = { name = "[S]earch", _ = "which_key_ignore" },
-        ['<leader>w'] = { name = '[W]orkspace', _ = 'which_key_ignore' },
+        ["<leader>w"] = { name = "[W]orkspace", _ = "which_key_ignore" },
-        ['<leader>t'] = { name = '[T]oggle', _ = 'which_key_ignore' },
+        ["<leader>t"] = { name = "[T]oggle", _ = "which_key_ignore" },
-        ['<leader>h'] = { name = 'Git [H]unk', _ = 'which_key_ignore' },
+        ["<leader>h"] = { name = "Git [H]unk", _ = "which_key_ignore" },
       }
       -- visual mode
-      require('which-key').register({
+      require("which-key").register({
-        ['<leader>h'] = { 'Git [H]unk' },
+        ["<leader>h"] = { "Git [H]unk" },
-      }, { mode = 'v' })
+      }, { mode = "v" })
     end,
   },
 
@@ -321,28 +319,26 @@ require('lazy').setup({
   -- Use the `dependencies` key to specify the dependencies of a particular plugin
 
   { -- Fuzzy Finder (files, lsp, etc)
-    'nvim-telescope/telescope.nvim',
+    "nvim-telescope/telescope.nvim",
-    event = 'VimEnter',
+    event = "VimEnter",
-    branch = '0.1.x',
+    branch = "0.1.x",
     dependencies = {
-      'nvim-lua/plenary.nvim',
+      "nvim-lua/plenary.nvim",
       { -- If encountering errors, see telescope-fzf-native README for installation instructions
-        'nvim-telescope/telescope-fzf-native.nvim',
+        "nvim-telescope/telescope-fzf-native.nvim",
 
         -- `build` is used to run some command when the plugin is installed/updated.
         -- This is only run then, not every time Neovim starts up.
-        build = 'make',
+        build = "make",
 
         -- `cond` is a condition used to determine whether this plugin should be
         -- installed and loaded.
-        cond = function()
+        cond = function() return vim.fn.executable "make" == 1 end,
-          return vim.fn.executable 'make' == 1
-        end,
       },
-      { 'nvim-telescope/telescope-ui-select.nvim' },
+      { "nvim-telescope/telescope-ui-select.nvim" },
 
       -- Useful for getting pretty icons, but requires a Nerd Font.
-      { 'nvim-tree/nvim-web-devicons',            enabled = vim.g.have_nerd_font },
+      { "nvim-tree/nvim-web-devicons", enabled = vim.g.have_nerd_font },
     },
     config = function()
       -- Telescope is a fuzzy finder that comes with a lot of different things that
@@ -366,7 +362,7 @@ require('lazy').setup({
 
       -- [[ Configure Telescope ]]
       -- See `:help telescope` and `:help telescope.setup()`
-      require('telescope').setup {
+      require("telescope").setup {
         -- You can put your default mappings / updates / etc. in here
         --  All the info you're looking for is in `:help telescope.setup()`
         --
@@ -377,69 +373,77 @@ require('lazy').setup({
         -- },
         -- pickers = {}
         extensions = {
-          ['ui-select'] = {
+          ["ui-select"] = {
-            require('telescope.themes').get_dropdown(),
+            require("telescope.themes").get_dropdown(),
           },
         },
       }
 
       -- Enable Telescope extensions if they are installed
-      pcall(require('telescope').load_extension, 'fzf')
+      pcall(require("telescope").load_extension, "fzf")
-      pcall(require('telescope').load_extension, 'ui-select')
+      pcall(require("telescope").load_extension, "ui-select")
 
       -- See `:help telescope.builtin`
-      local builtin = require 'telescope.builtin'
+      local builtin = require "telescope.builtin"
-      vim.keymap.set('n', '<leader>sh', builtin.help_tags, { desc = '[S]earch [H]elp' })
+      vim.keymap.set("n", "<leader>sh", builtin.help_tags, { desc = "[S]earch [H]elp" })
-      vim.keymap.set('n', '<leader>sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' })
+      vim.keymap.set("n", "<leader>sk", builtin.keymaps, { desc = "[S]earch [K]eymaps" })
-      vim.keymap.set('n', '<leader>sf', builtin.find_files, { desc = '[S]earch [F]iles' })
+      vim.keymap.set("n", "<leader>sf", builtin.find_files, { desc = "[S]earch [F]iles" })
-      vim.keymap.set('n', '<leader>ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' })
+      vim.keymap.set("n", "<leader>ss", builtin.builtin, { desc = "[S]earch [S]elect Telescope" })
-      vim.keymap.set('n', '<leader>sw', builtin.grep_string, { desc = '[S]earch current [W]ord' })
+      vim.keymap.set("n", "<leader>sw", builtin.grep_string, { desc = "[S]earch current [W]ord" })
-      vim.keymap.set('n', '<leader>sg', builtin.live_grep, { desc = '[S]earch by [G]rep' })
+      vim.keymap.set("n", "<leader>sg", builtin.live_grep, { desc = "[S]earch by [G]rep" })
-      vim.keymap.set('n', '<leader>sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' })
+      vim.keymap.set("n", "<leader>sd", builtin.diagnostics, { desc = "[S]earch [D]iagnostics" })
-      vim.keymap.set('n', '<leader>sr', builtin.resume, { desc = '[S]earch [R]esume' })
+      vim.keymap.set("n", "<leader>sr", builtin.resume, { desc = "[S]earch [R]esume" })
-      vim.keymap.set('n', '<leader>s.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' })
+      vim.keymap.set("n", "<leader>s.", builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' })
-      vim.keymap.set('n', '<leader><leader>', builtin.buffers, { desc = '[ ] Find existing buffers' })
+      vim.keymap.set("n", "<leader><leader>", builtin.buffers, { desc = "[ ] Find existing buffers" })
 
       -- Slightly advanced example of overriding default behavior and theme
-      vim.keymap.set('n', '<leader>/', function()
+      vim.keymap.set("n", "<leader>/", function()
         -- You can pass additional configuration to Telescope to change the theme, layout, etc.
-        builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown {
+        builtin.current_buffer_fuzzy_find(require("telescope.themes").get_dropdown {
           winblend = 10,
           previewer = false,
         })
-      end, { desc = '[/] Fuzzily search in current buffer' })
+      end, { desc = "[/] Fuzzily search in current buffer" })
 
       -- It's also possible to pass additional configuration options.
       --  See `:help telescope.builtin.live_grep()` for information about particular keys
-      vim.keymap.set('n', '<leader>s/', function()
+      vim.keymap.set(
-        builtin.live_grep {
+        "n",
-          grep_open_files = true,
+        "<leader>s/",
-          prompt_title = 'Live Grep in Open Files',
+        function()
-        }
+          builtin.live_grep {
-      end, { desc = '[S]earch [/] in Open Files' })
+            grep_open_files = true,
+            prompt_title = "Live Grep in Open Files",
+          }
+        end,
+        { desc = "[S]earch [/] in Open Files" }
+      )
 
       -- Shortcut for searching your Neovim configuration files
-      vim.keymap.set('n', '<leader>sn', function()
+      vim.keymap.set(
-        builtin.find_files { cwd = vim.fn.stdpath 'config' }
+        "n",
-      end, { desc = '[S]earch [N]eovim files' })
+        "<leader>sn",
+        function() builtin.find_files { cwd = vim.fn.stdpath "config" } end,
+        { desc = "[S]earch [N]eovim files" }
+      )
     end,
   },
 
   { -- LSP Configuration & Plugins
-    'neovim/nvim-lspconfig',
+    "neovim/nvim-lspconfig",
     dependencies = {
       -- Automatically install LSPs and related tools to stdpath for Neovim
-      { 'williamboman/mason.nvim', config = true }, -- NOTE: Must be loaded before dependants
+      { "williamboman/mason.nvim", config = true }, -- NOTE: Must be loaded before dependants
-      'williamboman/mason-lspconfig.nvim',
+      "williamboman/mason-lspconfig.nvim",
-      'WhoIsSethDaniel/mason-tool-installer.nvim',
+      "WhoIsSethDaniel/mason-tool-installer.nvim",
 
       -- Useful status updates for LSP.
       -- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})`
-      { 'j-hui/fidget.nvim',       opts = {} },
+      { "j-hui/fidget.nvim", opts = {} },
 
       -- `neodev` configures Lua LSP for your Neovim config, runtime and plugins
       -- used for completion, annotations and signatures of Neovim apis
-      { 'folke/neodev.nvim',       opts = {} },
+      { "folke/neodev.nvim", opts = {} },
     },
     config = function()
       -- Brief aside: **What is LSP?**
@@ -471,8 +475,8 @@ require('lazy').setup({
       --    That is to say, every time a new file is opened that is associated with
       --    an lsp (for example, opening `main.rs` is associated with `rust_analyzer`) this
       --    function will be executed to configure the current buffer
-      vim.api.nvim_create_autocmd('LspAttach', {
+      vim.api.nvim_create_autocmd("LspAttach", {
-        group = vim.api.nvim_create_augroup('kickstart-lsp-attach', { clear = true }),
+        group = vim.api.nvim_create_augroup("kickstart-lsp-attach", { clear = true }),
         callback = function(event)
           -- NOTE: Remember that Lua is a real programming language, and as such it is possible
           -- to define small helper and utility functions so you don't have to repeat yourself.
@@ -480,49 +484,49 @@ require('lazy').setup({
           -- In this case, we create a function that lets us more easily define mappings specific
           -- for LSP related items. It sets the mode, buffer and description for us each time.
           local map = function(keys, func, desc)
-            vim.keymap.set('n', keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc })
+            vim.keymap.set("n", keys, func, { buffer = event.buf, desc = "LSP: " .. desc })
           end
 
           -- Jump to the definition of the word under your cursor.
           --  This is where a variable was first declared, or where a function is defined, etc.
           --  To jump back, press <C-t>.
-          map('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition')
+          map("gd", require("telescope.builtin").lsp_definitions, "[G]oto [D]efinition")
 
           -- Find references for the word under your cursor.
-          map('gr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences')
+          map("gr", require("telescope.builtin").lsp_references, "[G]oto [R]eferences")
 
           -- Jump to the implementation of the word under your cursor.
           --  Useful when your language has ways of declaring types without an actual implementation.
-          map('gI', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation')
+          map("gI", require("telescope.builtin").lsp_implementations, "[G]oto [I]mplementation")
 
           -- Jump to the type of the word under your cursor.
           --  Useful when you're not sure what type a variable is and you want to see
           --  the definition of its *type*, not where it was *defined*.
-          map('<leader>D', require('telescope.builtin').lsp_type_definitions, 'Type [D]efinition')
+          map("<leader>D", require("telescope.builtin").lsp_type_definitions, "Type [D]efinition")
 
           -- Fuzzy find all the symbols in your current document.
           --  Symbols are things like variables, functions, types, etc.
-          map('<leader>ds', require('telescope.builtin').lsp_document_symbols, '[D]ocument [S]ymbols')
+          map("<leader>ds", require("telescope.builtin").lsp_document_symbols, "[D]ocument [S]ymbols")
 
           -- Fuzzy find all the symbols in your current workspace.
           --  Similar to document symbols, except searches over your entire project.
-          map('<leader>ws', require('telescope.builtin').lsp_dynamic_workspace_symbols, '[W]orkspace [S]ymbols')
+          map("<leader>ws", require("telescope.builtin").lsp_dynamic_workspace_symbols, "[W]orkspace [S]ymbols")
 
           -- Rename the variable under your cursor.
           --  Most Language Servers support renaming across files, etc.
-          map('<leader>rn', vim.lsp.buf.rename, '[R]e[n]ame')
+          map("<leader>rn", vim.lsp.buf.rename, "[R]e[n]ame")
 
           -- Execute a code action, usually your cursor needs to be on top of an error
           -- or a suggestion from your LSP for this to activate.
-          map('<leader>ca', vim.lsp.buf.code_action, '[C]ode [A]ction')
+          map("<leader>ca", vim.lsp.buf.code_action, "[C]ode [A]ction")
 
           -- Opens a popup that displays documentation about the word under your cursor
           --  See `:help K` for why this keymap.
-          map('K', vim.lsp.buf.hover, 'Hover Documentation')
+          map("K", vim.lsp.buf.hover, "Hover Documentation")
 
           -- WARN: This is not Goto Definition, this is Goto Declaration.
           --  For example, in C this would take you to the header.
-          map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
+          map("gD", vim.lsp.buf.declaration, "[G]oto [D]eclaration")
 
           -- The following two autocommands are used to highlight references of the
           -- word under your cursor when your cursor rests there for a little while.
@@ -531,24 +535,24 @@ require('lazy').setup({
           -- When you move your cursor, the highlights will be cleared (the second autocommand).
           local client = vim.lsp.get_client_by_id(event.data.client_id)
           if client and client.server_capabilities.documentHighlightProvider then
-            local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false })
+            local highlight_augroup = vim.api.nvim_create_augroup("kickstart-lsp-highlight", { clear = false })
-            vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, {
+            vim.api.nvim_create_autocmd({ "CursorHold", "CursorHoldI" }, {
               buffer = event.buf,
               group = highlight_augroup,
               callback = vim.lsp.buf.document_highlight,
             })
 
-            vim.api.nvim_create_autocmd({ 'CursorMoved', 'CursorMovedI' }, {
+            vim.api.nvim_create_autocmd({ "CursorMoved", "CursorMovedI" }, {
               buffer = event.buf,
               group = highlight_augroup,
               callback = vim.lsp.buf.clear_references,
             })
 
-            vim.api.nvim_create_autocmd('LspDetach', {
+            vim.api.nvim_create_autocmd("LspDetach", {
-              group = vim.api.nvim_create_augroup('kickstart-lsp-detach', { clear = true }),
+              group = vim.api.nvim_create_augroup("kickstart-lsp-detach", { clear = true }),
               callback = function(event2)
                 vim.lsp.buf.clear_references()
-                vim.api.nvim_clear_autocmds { group = 'kickstart-lsp-highlight', buffer = event2.buf }
+                vim.api.nvim_clear_autocmds { group = "kickstart-lsp-highlight", buffer = event2.buf }
               end,
             })
           end
@@ -558,9 +562,11 @@ require('lazy').setup({
           --
           -- This may be unwanted, since they displace some of your code
           if client and client.server_capabilities.inlayHintProvider and vim.lsp.inlay_hint then
-            map('<leader>th', function()
+            map(
-              vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled())
+              "<leader>th",
-            end, '[T]oggle Inlay [H]ints')
+              function() vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled()) end,
+              "[T]oggle Inlay [H]ints"
+            )
           end
         end,
       })
@@ -570,7 +576,7 @@ require('lazy').setup({
       --  When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities.
       --  So, we create new capabilities with nvim cmp, and then broadcast that to the servers.
       local capabilities = vim.lsp.protocol.make_client_capabilities()
-      capabilities = vim.tbl_deep_extend('force', capabilities, require('cmp_nvim_lsp').default_capabilities())
+      capabilities = vim.tbl_deep_extend("force", capabilities, require("cmp_nvim_lsp").default_capabilities())
 
       -- Enable the following language servers
       --  Feel free to add/remove any LSPs that you want here. They will automatically be installed.
@@ -593,34 +599,35 @@ require('lazy').setup({
         --
         -- But for many setups, the LSP (`tsserver`) will work just fine
         volar = {
-          filetypes = { 'typescript', 'javascript', 'javascriptreact', 'typescriptreact', 'vue' },
+          filetypes = { "typescript", "javascript", "javascriptreact", "typescriptreact", "vue" },
           init_options = {
             vue = {
               hybridMode = false,
             },
             typescript = {
               -- Global install of typescript
-              tsdk = '~/.nvm/versions/node/v18.20.3/lib/node_modules/typescript',
+              tsdk = "/usr/local/lib/node_modules/typescript",
+              -- tsdk = '~/.nvm/versions/node/v18.20.3/lib/node_modules/typescript',
             },
           },
         },
 
-        tsserver = {
+        -- tsserver = {
-          init_options = {
+        --   init_options = {
-            plugins = {
+        --     plugins = {
-              {
+        --       {
-                name = '@vue/typescript-plugin',
+        --         name = '@vue/typescript-plugin',
-                location = '/home/vjn/.nvm/versions/node/v22.2.0/lib/node_modules/@vue/typescript-plugin/',
+        --         location = '/home/vjn/.nvm/versions/node/v22.2.0/lib/node_modules/@vue/typescript-plugin/',
-                languages = { 'javascript', 'typescript', 'vue' },
+        --         languages = { 'javascript', 'typescript', 'vue' },
-              },
+        --       },
-            },
+        --     },
-          },
+        --   },
-          filetypes = {
+        --   filetypes = {
-            'javascript',
+        --     'javascript',
-            'typescript',
+        --     'typescript',
-            'vue',
+        --     'vue',
-          },
+        --   },
-        },
+        -- },
 
         lua_ls = {
           -- cmd = {...},
@@ -629,7 +636,7 @@ require('lazy').setup({
           settings = {
             Lua = {
               completion = {
-                callSnippet = 'Replace',
+                callSnippet = "Replace",
               },
               -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings
               -- diagnostics = { disable = { 'missing-fields' } },
@@ -644,25 +651,25 @@ require('lazy').setup({
       --    :Mason
       --
       --  You can press `g?` for help in this menu.
-      require('mason').setup()
+      require("mason").setup()
 
       -- You can add other tools here that you want Mason to install
       -- for you, so that they are available from within Neovim.
       local ensure_installed = vim.tbl_keys(servers or {})
       vim.list_extend(ensure_installed, {
-        'stylua', -- Used to format Lua code
+        "stylua", -- Used to format Lua code
       })
-      require('mason-tool-installer').setup { ensure_installed = ensure_installed }
+      require("mason-tool-installer").setup { ensure_installed = ensure_installed }
 
-      require('mason-lspconfig').setup {
+      require("mason-lspconfig").setup {
         handlers = {
           function(server_name)
             local server = servers[server_name] or {}
             -- This handles overriding only values explicitly passed
             -- by the server configuration above. Useful when disabling
             -- certain features of an LSP (for example, turning off formatting for tsserver)
-            server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {})
+            server.capabilities = vim.tbl_deep_extend("force", {}, capabilities, server.capabilities or {})
-            require('lspconfig')[server_name].setup(server)
+            require("lspconfig")[server_name].setup(server)
           end,
         },
       }
@@ -670,16 +677,14 @@ require('lazy').setup({
   },
 
   { -- Autoformat
-    'stevearc/conform.nvim',
+    "stevearc/conform.nvim",
     lazy = false,
     keys = {
       {
-        '<leader>f',
+        "<leader>f",
-        function()
+        function() require("conform").format { async = true, lsp_fallback = true } end,
-          require('conform').format { async = true, lsp_fallback = true }
+        mode = "",
-        end,
+        desc = "[F]ormat buffer",
-        mode = '',
-        desc = '[F]ormat buffer',
       },
     },
     opts = {
@@ -695,7 +700,7 @@ require('lazy').setup({
         }
       end,
       formatters_by_ft = {
-        lua = { 'stylua' },
+        lua = { "stylua" },
         -- Conform can also run multiple formatters sequentially
         -- python = { "isort", "black" },
         --
@@ -707,20 +712,18 @@ require('lazy').setup({
   },
 
   { -- Autocompletion
-    'hrsh7th/nvim-cmp',
+    "hrsh7th/nvim-cmp",
-    event = 'InsertEnter',
+    event = "InsertEnter",
     dependencies = {
       -- Snippet Engine & its associated nvim-cmp source
       {
-        'L3MON4D3/LuaSnip',
+        "L3MON4D3/LuaSnip",
         build = (function()
           -- Build Step is needed for regex support in snippets.
           -- This step is not supported in many windows environments.
           -- Remove the below condition to re-enable on windows.
-          if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then
+          if vim.fn.has "win32" == 1 or vim.fn.executable "make" == 0 then return end
-            return
+          return "make install_jsregexp"
-          end
-          return 'make install_jsregexp'
         end)(),
         dependencies = {
           -- `friendly-snippets` contains a variety of premade snippets.
@@ -734,27 +737,25 @@ require('lazy').setup({
           -- },
         },
       },
-      'saadparwaiz1/cmp_luasnip',
+      "saadparwaiz1/cmp_luasnip",
 
       -- Adds other completion capabilities.
       --  nvim-cmp does not ship with all sources by default. They are split
       --  into multiple repos for maintenance purposes.
-      'hrsh7th/cmp-nvim-lsp',
+      "hrsh7th/cmp-nvim-lsp",
-      'hrsh7th/cmp-path',
+      "hrsh7th/cmp-path",
     },
     config = function()
       -- See `:help cmp`
-      local cmp = require 'cmp'
+      local cmp = require "cmp"
-      local luasnip = require 'luasnip'
+      local luasnip = require "luasnip"
       luasnip.config.setup {}
 
       cmp.setup {
         snippet = {
-          expand = function(args)
+          expand = function(args) luasnip.lsp_expand(args.body) end,
-            luasnip.lsp_expand(args.body)
-          end,
         },
-        completion = { completeopt = 'menu,menuone,noinsert' },
+        completion = { completeopt = "menu,menuone,noinsert" },
 
         -- For an understanding of why these mappings were
         -- chosen, you will need to read `:help ins-completion`
@@ -762,18 +763,18 @@ require('lazy').setup({
         -- No, but seriously. Please read `:help ins-completion`, it is really good!
         mapping = cmp.mapping.preset.insert {
           -- Select the [n]ext item
-          ['<C-n>'] = cmp.mapping.select_next_item(),
+          ["<C-n>"] = cmp.mapping.select_next_item(),
           -- Select the [p]revious item
-          ['<C-p>'] = cmp.mapping.select_prev_item(),
+          ["<C-p>"] = cmp.mapping.select_prev_item(),
 
           -- Scroll the documentation window [b]ack / [f]orward
-          ['<C-b>'] = cmp.mapping.scroll_docs(-4),
+          ["<C-b>"] = cmp.mapping.scroll_docs(-4),
-          ['<C-f>'] = cmp.mapping.scroll_docs(4),
+          ["<C-f>"] = cmp.mapping.scroll_docs(4),
 
           -- Accept ([y]es) the completion.
           --  This will auto-import if your LSP supports it.
           --  This will expand snippets if the LSP sent a snippet.
-          ['<C-y>'] = cmp.mapping.confirm { select = true },
+          ["<C-y>"] = cmp.mapping.confirm { select = true },
 
           -- If you prefer more traditional completion keymaps,
           -- you can uncomment the following lines
@@ -784,7 +785,7 @@ require('lazy').setup({
           -- Manually trigger a completion from nvim-cmp.
           --  Generally you don't need this, because nvim-cmp will display
           --  completions whenever it has completion options available.
-          ['<C-Space>'] = cmp.mapping.complete {},
+          ["<C-Space>"] = cmp.mapping.complete {},
 
           -- Think of <c-l> as moving to the right of your snippet expansion.
           --  So if you have a snippet that's like:
@@ -794,24 +795,20 @@ require('lazy').setup({
           --
           -- <c-l> will move you to the right of each of the expansion locations.
           -- <c-h> is similar, except moving you backwards.
-          ['<C-l>'] = cmp.mapping(function()
+          ["<C-l>"] = cmp.mapping(function()
-            if luasnip.expand_or_locally_jumpable() then
+            if luasnip.expand_or_locally_jumpable() then luasnip.expand_or_jump() end
-              luasnip.expand_or_jump()
+          end, { "i", "s" }),
-            end
+          ["<C-h>"] = cmp.mapping(function()
-          end, { 'i', 's' }),
+            if luasnip.locally_jumpable(-1) then luasnip.jump(-1) end
-          ['<C-h>'] = cmp.mapping(function()
+          end, { "i", "s" }),
-            if luasnip.locally_jumpable(-1) then
-              luasnip.jump(-1)
-            end
-          end, { 'i', 's' }),
 
           -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see:
           --    https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps
         },
         sources = {
-          { name = 'nvim_lsp' },
+          { name = "nvim_lsp" },
-          { name = 'luasnip' },
+          { name = "luasnip" },
-          { name = 'path' },
+          { name = "path" },
         },
       }
     end,
@@ -822,24 +819,29 @@ require('lazy').setup({
     -- change the command in the config to whatever the name of that colorscheme is.
     --
     -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`.
-    'folke/tokyonight.nvim',
+    "folke/tokyonight.nvim",
     priority = 1000, -- Make sure to load this before all the other start plugins.
     init = function()
       -- Load the colorscheme here.
       -- Like many other themes, this one has different styles, and you could load
       -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'.
-      vim.cmd.colorscheme 'tokyonight-night'
+      vim.cmd.colorscheme "tokyonight-night"
 
       -- You can configure highlights by doing something like:
-      vim.cmd.hi 'Comment gui=none'
+      vim.cmd.hi "Comment gui=none"
     end,
   },
 
   -- Highlight todo, notes, etc in comments
-  { 'folke/todo-comments.nvim', event = 'VimEnter', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } },
+  {
+    "folke/todo-comments.nvim",
+    event = "VimEnter",
+    dependencies = { "nvim-lua/plenary.nvim" },
+    opts = { signs = false },
+  },
 
   { -- Collection of various small independent plugins/modules
-    'echasnovski/mini.nvim',
+    "echasnovski/mini.nvim",
     config = function()
       -- Better Around/Inside textobjects
       --
@@ -847,19 +849,19 @@ require('lazy').setup({
       --  - va)  - [V]isually select [A]round [)]paren
       --  - yinq - [Y]ank [I]nside [N]ext [']quote
       --  - ci'  - [C]hange [I]nside [']quote
-      require('mini.ai').setup { n_lines = 500 }
+      require("mini.ai").setup { n_lines = 500 }
 
       -- Add/delete/replace surroundings (brackets, quotes, etc.)
       --
       -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren
       -- - sd'   - [S]urround [D]elete [']quotes
       -- - sr)'  - [S]urround [R]eplace [)] [']
-      require('mini.surround').setup()
+      require("mini.surround").setup()
 
       -- Simple and easy statusline.
       --  You could remove this setup call if you don't like it,
       --  and try some other statusline plugin
-      local statusline = require 'mini.statusline'
+      local statusline = require "mini.statusline"
       -- set use_icons to true if you have a Nerd Font
       statusline.setup { use_icons = vim.g.have_nerd_font }
 
@@ -867,37 +869,35 @@ require('lazy').setup({
       -- default behavior. For example, here we set the section for
       -- cursor location to LINE:COLUMN
       ---@diagnostic disable-next-line: duplicate-set-field
-      statusline.section_location = function()
+      statusline.section_location = function() return "%2l:%-2v" end
-        return '%2l:%-2v'
-      end
 
       -- ... and there is more!
       --  Check out: https://github.com/echasnovski/mini.nvim
     end,
   },
   { -- Highlight, edit, and navigate code
-    'nvim-treesitter/nvim-treesitter',
+    "nvim-treesitter/nvim-treesitter",
-    build = ':TSUpdate',
+    build = ":TSUpdate",
     opts = {
-      ensure_installed = { 'bash', 'c', 'diff', 'html', 'lua', 'luadoc', 'markdown', 'vim', 'vimdoc', 'vue' },
+      ensure_installed = { "bash", "c", "diff", "html", "lua", "luadoc", "markdown", "vim", "vimdoc" },
       -- Autoinstall languages that are not installed
-      auto_install = true,
+      auto_install = false,
       highlight = {
         enable = true,
         -- Some languages depend on vim's regex highlighting system (such as Ruby) for indent rules.
         --  If you are experiencing weird indenting issues, add the language to
         --  the list of additional_vim_regex_highlighting and disabled languages for indent.
-        additional_vim_regex_highlighting = { 'ruby' },
+        additional_vim_regex_highlighting = { "ruby" },
       },
-      indent = { enable = true, disable = { 'ruby' } },
+      indent = { enable = true, disable = { "ruby" } },
     },
     config = function(_, opts)
       -- [[ Configure Treesitter ]] See `:help nvim-treesitter`
 
       -- Prefer git instead of curl in order to improve connectivity in some environments
-      require('nvim-treesitter.install').prefer_git = true
+      require("nvim-treesitter.install").prefer_git = true
       ---@diagnostic disable-next-line: missing-fields
-      require('nvim-treesitter.configs').setup(opts)
+      require("nvim-treesitter.configs").setup(opts)
 
       -- There are additional nvim-treesitter modules that you can use to interact
       -- with nvim-treesitter. You should go explore a few and see what interests you:
@@ -921,7 +921,7 @@ require('lazy').setup({
   -- require 'kickstart.plugins.indent_line',
   -- require 'kickstart.plugins.lint',
   -- require 'kickstart.plugins.autopairs',
-  require 'kickstart.plugins.neo-tree',
+  require "kickstart.plugins.neo-tree",
   -- require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps
 
   -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
@@ -935,19 +935,19 @@ require('lazy').setup({
     -- If you are using a Nerd Font: set icons to an empty table which will use the
     -- default lazy.nvim defined Nerd Font icons, otherwise define a unicode icons table
     icons = vim.g.have_nerd_font and {} or {
-      cmd = '⌘',
+      cmd = "⌘",
-      config = '🛠',
+      config = "🛠",
-      event = '📅',
+      event = "📅",
-      ft = '📂',
+      ft = "📂",
-      init = '⚙',
+      init = "⚙",
-      keys = '🗝',
+      keys = "🗝",
-      plugin = '🔌',
+      plugin = "🔌",
-      runtime = '💻',
+      runtime = "💻",
-      require = '🌙',
+      require = "🌙",
-      source = '📄',
+      source = "📄",
-      start = '🚀',
+      start = "🚀",
-      task = '📌',
+      task = "📌",
-      lazy = '💤 ',
+      lazy = "💤 ",
     },
   },
 })