remvoe comments

init.lua

@@ -132,39 +132,8 @@ rtp:prepend(lazypath)
 -- [[ Configure and install plugins ]]
 --  To check the current status of your plugins, run
 --    :Lazy
---
---  You can press `?` in this menu for help. Use `:q` to close the window
---
---  To update plugins you can run
---    :Lazy update
---
--- NOTE: Here is where you install your plugins.
 require('lazy').setup({
-  -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link).
   'NMAC427/guess-indent.nvim', -- Detect tabstop and shiftwidth automatically
-
-  -- NOTE: Plugins can also be added by using a table,
-  -- with the first argument being the link and the following
-  -- keys can be used to configure plugin behavior/loading/etc.
-  --
-  -- Use `opts = {}` to automatically pass options to a plugin's `setup()` function, forcing the plugin to be loaded.
-  --
-
-  -- Alternatively, use `config = function() ... end` for full control over the configuration.
-  -- If you prefer to call `setup` explicitly, use:
-  --    {
-  --        'lewis6991/gitsigns.nvim',
-  --        config = function()
-  --            require('gitsigns').setup({
-  --                -- Your gitsigns configuration here
-  --            })
-  --        end,
-  --    }
-  --
-  -- Here is a more advanced example where we pass configuration
-  -- options to `gitsigns.nvim`.
-  --
-  -- See `:help gitsigns` to understand what the configuration keys do
   { -- Adds git related signs to the gutter, as well as utilities for managing changes
     'lewis6991/gitsigns.nvim',
     opts = {
@@ -177,33 +146,13 @@ require('lazy').setup({
       },
     },
   },
-
-  -- NOTE: Plugins can also be configured to run Lua code when they are loaded.
-  --
-  -- This is often very useful to both group configuration, as well as handle
-  -- lazy loading plugins that don't need to be loaded immediately at startup.
-  --
-  -- For example, in the following configuration, we use:
-  --  event = 'VimEnter'
-  --
-  -- which loads which-key before all the UI elements are loaded. Events can be
-  -- normal autocommands events (`:help autocmd-events`).
-  --
-  -- Then, because we use the `opts` key (recommended), the configuration runs
-  -- after the plugin has been loaded as `require(MODULE).setup(opts)`.
-
   { -- Useful plugin to show you pending keybinds.
     'folke/which-key.nvim',
     event = 'VimEnter', -- Sets the loading event to 'VimEnter'
     opts = {
-      -- delay between pressing a key and opening which-key (milliseconds)
-      -- this setting is independent of vim.o.timeoutlen
       delay = 0,
       icons = {
-        -- set icon mappings to true if you have a Nerd Font
         mappings = vim.g.have_nerd_font,
-        -- If you are using a Nerd Font: set icons.keys to an empty table which will use the
-        -- default which-key.nvim defined Nerd Font icons, otherwise define a string table
         keys = vim.g.have_nerd_font and {} or {
           Up = '<Up> ',
           Down = '<Down> ',
@@ -236,7 +185,6 @@ require('lazy').setup({
         },
       },
 
-      -- Document existing key chains
       spec = {
         { '<leader>o', group = '[O]bsidian' },
         { '<leader>s', group = '[S]earch' },
@@ -245,14 +193,6 @@ require('lazy').setup({
       },
     },
   },
-
-  -- NOTE: Plugins can specify dependencies.
-  --
-  -- The dependencies are proper plugin specifications as well - anything
-  -- you do for a plugin at the top level, you can do for a dependency.
-  --
-  -- Use the `dependencies` key to specify the dependencies of a particular plugin
-
   { -- Fuzzy Finder (files, lsp, etc)
     'nvim-telescope/telescope.nvim',
     event = 'VimEnter',
@@ -260,54 +200,16 @@ require('lazy').setup({
       'nvim-lua/plenary.nvim',
       { -- If encountering errors, see telescope-fzf-native README for installation instructions
         'nvim-telescope/telescope-fzf-native.nvim',
-
-        -- `build` is used to run some command when the plugin is installed/updated.
-        -- This is only run then, not every time Neovim starts up.
         build = 'make',
-
-        -- `cond` is a condition used to determine whether this plugin should be
-        -- installed and loaded.
         cond = function()
           return vim.fn.executable 'make' == 1
         end,
       },
       { 'nvim-telescope/telescope-ui-select.nvim' },
-
-      -- Useful for getting pretty icons, but requires a Nerd Font.
       { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font },
     },
     config = function()
-      -- Telescope is a fuzzy finder that comes with a lot of different things that
-      -- it can fuzzy find! It's more than just a "file finder", it can search
-      -- many different aspects of Neovim, your workspace, LSP, and more!
-      --
-      -- The easiest way to use Telescope, is to start by doing something like:
-      --  :Telescope help_tags
-      --
-      -- After running this command, a window will open up and you're able to
-      -- type in the prompt window. You'll see a list of `help_tags` options and
-      -- a corresponding preview of the help.
-      --
-      -- Two important keymaps to use while in Telescope are:
-      --  - Insert mode: <c-/>
-      --  - Normal mode: ?
-      --
-      -- This opens a window that shows you all of the keymaps for the current
-      -- Telescope picker. This is really useful to discover what Telescope can
-      -- do as well as how to actually do it!
-
-      -- [[ Configure Telescope ]]
-      -- See `:help telescope` and `:help telescope.setup()`
       require('telescope').setup {
-        -- You can put your default mappings / updates / etc. in here
-        --  All the info you're looking for is in `:help telescope.setup()`
-        --
-        -- defaults = {
-        --   mappings = {
-        --     i = { ['<c-enter>'] = 'to_fuzzy_refine' },
-        --   },
-        -- },
-        -- pickers = {}
         extensions = {
           ['ui-select'] = {
             require('telescope.themes').get_dropdown(),
@@ -315,11 +217,9 @@ require('lazy').setup({
         },
       }
 
-      -- Enable Telescope extensions if they are installed
       pcall(require('telescope').load_extension, 'fzf')
       pcall(require('telescope').load_extension, 'ui-select')
 
-      -- See `:help telescope.builtin`
       local builtin = require 'telescope.builtin'
       vim.keymap.set('n', '<leader>sh', builtin.help_tags, { desc = '[S]earch [H]elp' })
       vim.keymap.set('n', '<leader>sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' })
@@ -332,17 +232,13 @@ require('lazy').setup({
       vim.keymap.set('n', '<leader>s.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' })
       vim.keymap.set('n', '<leader><leader>', builtin.buffers, { desc = '[ ] Find existing buffers' })
 
-      -- Slightly advanced example of overriding default behavior and theme
       vim.keymap.set('n', '<leader>/', function()
-        -- You can pass additional configuration to Telescope to change the theme, layout, etc.
         builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown {
           winblend = 10,
           previewer = false,
         })
       end, { desc = '[/] Fuzzily search in current buffer' })
 
-      -- It's also possible to pass additional configuration options.
-      --  See `:help telescope.builtin.live_grep()` for information about particular keys
       vim.keymap.set('n', '<leader>s/', function()
         builtin.live_grep {
           grep_open_files = true,
@@ -350,7 +246,6 @@ require('lazy').setup({
         }
       end, { desc = '[S]earch [/] in Open Files' })
 
-      -- Shortcut for searching your Neovim configuration files
       vim.keymap.set('n', '<leader>sn', function()
         builtin.find_files { cwd = vim.fn.stdpath 'config' }
       end, { desc = '[S]earch [N]eovim files' })