config complete

init.lua

@@ -19,7 +19,6 @@
 ========                                                     ========
 =====================================================================
 =====================================================================
-
 What is Kickstart?
 
   Kickstart.nvim is *not* a distribution.
@@ -151,6 +150,9 @@ vim.opt.inccommand = 'split'
 -- Show which line your cursor is on
 vim.opt.cursorline = true
 
+vim.opt.guicursor = 'n-v-c-sm-i-ci-ve:block'
+
+
 -- Minimal number of screen lines to keep above and below the cursor.
 vim.opt.scrolloff = 10
 
@@ -164,7 +166,7 @@ vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')
 -- Diagnostic keymaps
 vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous [D]iagnostic message' })
 vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next [D]iagnostic message' })
-vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = 'Show diagnostic [E]rror messages' })
+vim.keymap.set('n', '<leader>f', vim.diagnostic.open_float, { desc = 'Show diagnostic [E]rror messages' })
 vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })
 
 -- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
@@ -175,6 +177,18 @@ vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagn
 -- or just use <C-\><C-n> to exit terminal mode
 vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })
 
+-- Explore
+vim.keymap.set('n', '<Leader>e', '<cmd>Ex<CR>')
+
+-- Better escape
+vim.keymap.set('i', 'jk', '<Esc>')
+vim.keymap.set('i', 'jj', '<Esc>')
+
+-- Fast save and quit
+vim.keymap.set('n', '<Leader>w', '<cmd>w<CR>')
+vim.keymap.set('n', '<Leader>q', '<cmd>q<CR>')
+
+
 -- TIP: Disable arrow keys in normal mode
 -- vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
 -- vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
@@ -238,7 +252,7 @@ require('lazy').setup({
   --    require('Comment').setup({})
 
   -- "gc" to comment visual regions/lines
-  { 'numToStr/Comment.nvim', opts = {} },
+  { 'numToStr/Comment.nvim',    opts = {} },
 
   -- Here is a more advanced example where we pass configuration
   -- options to `gitsigns.nvim`. This is equivalent to the following Lua:
@@ -273,7 +287,7 @@ require('lazy').setup({
   -- after the plugin has been loaded:
   --  config = function() ... end
 
-  { -- Useful plugin to show you pending keybinds.
+  {                     -- Useful plugin to show you pending keybinds.
     'folke/which-key.nvim',
     event = 'VimEnter', -- Sets the loading event to 'VimEnter'
     config = function() -- This is the function that runs, AFTER loading
@@ -325,7 +339,7 @@ require('lazy').setup({
       { 'nvim-telescope/telescope-ui-select.nvim' },
 
       -- Useful for getting pretty icons, but requires a Nerd Font.
-      { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font },
+      { 'nvim-tree/nvim-web-devicons',            enabled = vim.g.have_nerd_font },
     },
     config = function()
       -- Telescope is a fuzzy finder that comes with a lot of different things that
@@ -372,15 +386,15 @@ require('lazy').setup({
 
       -- See `:help telescope.builtin`
       local builtin = require 'telescope.builtin'
-      vim.keymap.set('n', '<leader>sh', builtin.help_tags, { desc = '[S]earch [H]elp' })
+      vim.keymap.set('n', ';h', builtin.help_tags, { desc = '[S]earch [H]elp' })
-      vim.keymap.set('n', '<leader>sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' })
+      vim.keymap.set('n', ';k', builtin.keymaps, { desc = '[S]earch [K]eymaps' })
-      vim.keymap.set('n', '<leader>sf', builtin.find_files, { desc = '[S]earch [F]iles' })
+      vim.keymap.set('n', ';f', builtin.find_files, { desc = '[S]earch [F]iles' })
-      vim.keymap.set('n', '<leader>ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' })
+      vim.keymap.set('n', ';ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' })
-      vim.keymap.set('n', '<leader>sw', builtin.grep_string, { desc = '[S]earch current [W]ord' })
+      vim.keymap.set('n', ';w', builtin.grep_string, { desc = '[S]earch current [W]ord' })
-      vim.keymap.set('n', '<leader>sg', builtin.live_grep, { desc = '[S]earch by [G]rep' })
+      vim.keymap.set('n', ';g', builtin.live_grep, { desc = '[S]earch by [G]rep' })
-      vim.keymap.set('n', '<leader>sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' })
+      vim.keymap.set('n', ';d', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' })
-      vim.keymap.set('n', '<leader>sr', builtin.resume, { desc = '[S]earch [R]esume' })
+      vim.keymap.set('n', ';r', builtin.resume, { desc = '[S]earch [R]esume' })
-      vim.keymap.set('n', '<leader>s.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' })
+      vim.keymap.set('n', ';s', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' })
       vim.keymap.set('n', '<leader><leader>', builtin.buffers, { desc = '[ ] Find existing buffers' })
 
       -- Slightly advanced example of overriding default behavior and theme
@@ -418,11 +432,11 @@ require('lazy').setup({
 
       -- Useful status updates for LSP.
       -- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})`
-      { 'j-hui/fidget.nvim', opts = {} },
+      { 'j-hui/fidget.nvim',       opts = {} },
 
       -- `neodev` configures Lua LSP for your Neovim config, runtime and plugins
       -- used for completion, annotations and signatures of Neovim apis
-      { 'folke/neodev.nvim', opts = {} },
+      { 'folke/neodev.nvim',       opts = {} },
     },
     config = function()
       -- Brief aside: **What is LSP?**
@@ -567,15 +581,21 @@ require('lazy').setup({
       local servers = {
         -- clangd = {},
         -- gopls = {},
-        -- pyright = {},
+        astro = {},
-        -- rust_analyzer = {},
+        cssls = {},
+        html = {},
+        tailwindcss = {},
+        emmet_ls = {},
+        pyright = {},
+        rust_analyzer = {},
+        svelte = {},
         -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs
         --
         -- Some languages (like typescript) have entire language plugins that can be useful:
         --    https://github.com/pmizio/typescript-tools.nvim
         --
         -- But for many setups, the LSP (`tsserver`) will work just fine
-        -- tsserver = {},
+        tsserver = {},
         --
 
         lua_ls = {
@@ -606,7 +626,7 @@ require('lazy').setup({
       -- for you, so that they are available from within Neovim.
       local ensure_installed = vim.tbl_keys(servers or {})
       vim.list_extend(ensure_installed, {
-        'stylua', -- Used to format Lua code
+        --'stylua', -- Used to format Lua code
       })
       require('mason-tool-installer').setup { ensure_installed = ensure_installed }
 
@@ -651,13 +671,13 @@ require('lazy').setup({
         }
       end,
       formatters_by_ft = {
-        lua = { 'stylua' },
+        -- lua = { 'stylua' },
         -- Conform can also run multiple formatters sequentially
         -- python = { "isort", "black" },
         --
         -- You can use a sub-list to tell conform to run *until* a formatter
         -- is found.
-        -- javascript = { { "prettierd", "prettier" } },
+        javascript = { { "prettierd", "prettier" } },
       },
     },
   },
@@ -778,13 +798,13 @@ require('lazy').setup({
     -- change the command in the config to whatever the name of that colorscheme is.
     --
     -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`.
-    'folke/tokyonight.nvim',
+    'rebelot/kanagawa.nvim',
     priority = 1000, -- Make sure to load this before all the other start plugins.
     init = function()
       -- Load the colorscheme here.
       -- Like many other themes, this one has different styles, and you could load
       -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'.
-      vim.cmd.colorscheme 'tokyonight-night'
+      vim.cmd.colorscheme 'kanagawa-dragon'
 
       -- You can configure highlights by doing something like:
       vim.cmd.hi 'Comment gui=none'
@@ -835,7 +855,7 @@ require('lazy').setup({
     'nvim-treesitter/nvim-treesitter',
     build = ':TSUpdate',
     opts = {
-      ensure_installed = { 'bash', 'c', 'html', 'lua', 'luadoc', 'markdown', 'vim', 'vimdoc' },
+      ensure_installed = { 'bash', 'c', 'html', 'lua', 'luadoc', 'markdown', 'vim', 'vimdoc', 'astro', 'html', 'svelte', 'javascript', 'rust', 'tsx', 'typescript', 'css' },
       -- Autoinstall languages that are not installed
       auto_install = true,
       highlight = {
@@ -875,10 +895,10 @@ require('lazy').setup({
   --
   -- require 'kickstart.plugins.debug',
   -- require 'kickstart.plugins.indent_line',
-  -- require 'kickstart.plugins.lint',
+  require 'kickstart.plugins.lint',
-  -- require 'kickstart.plugins.autopairs',
+  require 'kickstart.plugins.autopairs',
   -- require 'kickstart.plugins.neo-tree',
-  -- require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps
+  require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps
 
   -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
   --    This is the easiest way to modularize your config.