added plugins of harpoon, copilot(not activaited) as well as keymaps

README.md

@@ -220,7 +220,7 @@ sudo mkdir -p /opt/nvim-linux-x86_64
 sudo chmod a+rX /opt/nvim-linux-x86_64
 sudo tar -C /opt -xzf nvim-linux-x86_64.tar.gz
 
-# make it available in /usr/local/bin, distro installs to /usr/bin
+# make it available in /usr/local/bin, distro installs to /usr/bi?
 sudo ln -sf /opt/nvim-linux-x86_64/bin/nvim /usr/local/bin/
 ```
 </details>

init.lua

@@ -26,9 +26,7 @@ What is Kickstart?
 
   Kickstart.nvim is a starting point for your own configuration.
     The goal is that you can read every line of code, top-to-bottom, understand
-    what your configuration is doing, and modify it to suit your needs.
+    what your configuration is doing, and modify it to suit your nee    Once you've done that, you can start exploring, configuring and tinkering to
-
-    Once you've done that, you can start exploring, configuring and tinkering to
     make Neovim your own! That might mean leaving Kickstart just the way it is for a while
     or immediately breaking it into modular pieces. It's up to you!
 
@@ -90,6 +88,9 @@ P.S. You can delete this when you're done too. It's your config now! :)
 vim.g.mapleader = ' '
 vim.g.maplocalleader = ' '
 
+-- I set this.
+vim.keymap.set('n', '<leader>op', vim.cmd.Ex, { desc = 'Opens netRW' })
+
 -- Set to true if you have a Nerd Font installed and selected in the terminal
 vim.g.have_nerd_font = false
 
@@ -102,7 +103,7 @@ vim.g.have_nerd_font = false
 vim.opt.number = true
 -- You can also add relative line numbers, to help with jumping.
 --  Experiment for yourself to see if you like it!
--- vim.opt.relativenumber = true
+vim.opt.relativenumber = true
 
 -- Enable mouse mode, can be useful for resizing splits for example!
 vim.opt.mouse = 'a'
@@ -275,6 +276,42 @@ require('lazy').setup({
       },
     },
   },
+  {
+    'ThePrimeagen/harpoon',
+    branch = 'harpoon2',
+    dependencies = { 'nvim-lua/plenary.nvim' },
+  },
+
+  -- Start Copilot
+  -- {
+  --   'zbirenbaum/copilot.lua',
+  --   cmd = 'Copilot',
+  --   event = 'InsertEnter',
+  --   config = function()
+  --     require('copilot').setup {
+  --       suggestion = { enabled = true },
+  --       panel = { enabled = true, auto_refresh = true },
+  --     }
+  --   end,
+  -- },
+  -- {
+  --   'giuxtaposition/blink-cmp-copilot',
+  --   config = function()
+  --     require('copilot').setup {
+  --       suggestion = {
+  --         enabled = true,
+  --         auto_trigger = true,
+  --         keymap = {
+  --           accept = '<C-Enter>',
+  --           next = '<C-j>',
+  --           prev = '<C-k>',
+  --           dismiss = '<C-e>',
+  --         },
+  --       },
+  --       panel = { enabled = false },
+  --     }
+  --   end,
+  -- },
 
   -- NOTE: Plugins can also be configured to run Lua code when they are loaded.
   --
@@ -482,7 +519,27 @@ require('lazy').setup({
       { 'j-hui/fidget.nvim', opts = {} },
 
       -- Allows extra capabilities provided by blink.cmp
-      'saghen/blink.cmp',
+      {
+        'saghen/blink.cmp',
+        -- dependencies = {
+        --   {
+        --     'giuxtaposition/blink-cmp-copilot',
+        --   },
+        -- },
+        -- opts = {
+        --   sources = {
+        --     default = { 'lsp', 'path', 'snippets', 'buffer', 'copilot' },
+        --     providers = {
+        --       copilot = {
+        --         name = 'copilot',
+        --         module = 'blink-cmp-copilot',
+        --         score_offset = 100,
+        --         async = true,
+        --       },
+        --     },
+        --   },
+        -- },
+      },
     },
     config = function()
       -- Brief aside: **What is LSP?**
@@ -617,9 +674,6 @@ require('lazy').setup({
           end
         end,
       })
-
-      -- Diagnostic Config
-      -- See :help vim.diagnostic.Opts
       vim.diagnostic.config {
         severity_sort = true,
         float = { border = 'rounded', source = 'if_many' },
@@ -663,7 +717,15 @@ require('lazy').setup({
       --  - settings (table): Override the default settings passed when initializing the server.
       --        For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/
       local servers = {
-        -- clangd = {},
+        clangd = {
+          settings = {
+            clangd = {
+              completion = {
+                callSnippet = 'Replace',
+              },
+            },
+          },
+        },
         -- gopls = {},
         -- pyright = {},
         -- rust_analyzer = {},
@@ -674,7 +736,6 @@ require('lazy').setup({
         --
         -- But for many setups, the LSP (`ts_ls`) will work just fine
         -- ts_ls = {},
-        --
 
         lua_ls = {
           -- cmd = { ... },
@@ -727,6 +788,11 @@ require('lazy').setup({
       }
     end,
   },
+  {
+    'pmizio/typescript-tools.nvim',
+    dependencies = { 'nvim-lua/plenary.nvim', 'neovim/nvim-lspconfig' },
+    opts = {},
+  },
 
   { -- Autoformat
     'stevearc/conform.nvim',
@@ -801,6 +867,7 @@ require('lazy').setup({
         opts = {},
       },
       'folke/lazydev.nvim',
+      -- 'guixtaposition/blink-cmp-copilot',
     },
     --- @module 'blink.cmp'
     --- @type blink.cmp.Config
@@ -846,9 +913,17 @@ require('lazy').setup({
       },
 
       sources = {
+        --
+        --iadddcoopilottothiss
         default = { 'lsp', 'path', 'snippets', 'lazydev' },
         providers = {
           lazydev = { module = 'lazydev.integrations.blink', score_offset = 100 },
+          -- copilot = {
+          --   name = 'copilot',
+          --   module = 'blink-cmp-copilot',
+          --   score_offset = 100,
+          --   async = true,
+          -- },
         },
       },
 
@@ -878,6 +953,7 @@ require('lazy').setup({
     config = function()
       ---@diagnostic disable-next-line: missing-fields
       require('tokyonight').setup {
+        transparent = true,
         styles = {
           comments = { italic = false }, -- Disable italics in comments
         },
@@ -965,18 +1041,19 @@ require('lazy').setup({
   --  Here are some example plugins that I've included in the Kickstart repository.
   --  Uncomment any of the lines below to enable them (you will need to restart nvim).
   --
-  -- require 'kickstart.plugins.debug',
+  require 'kickstart.plugins.debug',
-  -- require 'kickstart.plugins.indent_line',
+  require 'kickstart.plugins.indent_line',
-  -- require 'kickstart.plugins.lint',
+  require 'kickstart.plugins.lint',
-  -- require 'kickstart.plugins.autopairs',
+  require 'kickstart.plugins.autopairs',
-  -- require 'kickstart.plugins.neo-tree',
+  require 'kickstart.plugins.neo-tree',
   -- require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps
+  vim.keymap.set('n', '<C-e>', ':Neotree toggle<CR>', { desc = 'open explore s s' }),
 
   -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
   --    This is the easiest way to modularize your config.
   --
   --  Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going.
-  -- { import = 'custom.plugins' },
+  { import = 'custom.plugins' },
   --
   -- For additional information with loading, sourcing and examples see `:help lazy.nvim-🔌-plugin-spec`
   -- Or use telescope!
@@ -1004,5 +1081,39 @@ require('lazy').setup({
   },
 })
 
+local harpoon = require 'harpoon'
+
+-- REQUIRED
+harpoon:setup()
+-- REQUIRED
+
+vim.keymap.set('n', '<leader>a', function()
+  harpoon:list():add()
+end, { desc = 'Add file to harpoon list.' })
+vim.keymap.set('n', '<C-e>', function()
+  harpoon.ui:toggle_quick_menu(harpoon:list())
+end, { desc = 'Toggle harpoon quick menu.' })
+
+vim.keymap.set('n', '<leader>1', function()
+  harpoon:list():select(1)
+end, { desc = 'Navigate to file at harpoon posistion 1' })
+vim.keymap.set('n', '<leader>2', function()
+  harpoon:list():select(2)
+end, { desc = 'Navigate to file at harpoon posistion 2' })
+vim.keymap.set('n', '<leader>3', function()
+  harpoon:list():select(3)
+end, { desc = 'Navigate to file at harpoon posistion 3' })
+vim.keymap.set('n', '<leader>4', function()
+  harpoon:list():select(4)
+end, { desc = 'Navigate to file at harpoon posistion 4' })
+
+-- Toggle previous & next buffers stored within Harpoon list
+vim.keymap.set('n', '<C-S-P>', function()
+  harpoon:list():prev()
+end, { desc = 'Harpoon previous file' })
+vim.keymap.set('n', '<C-S-N>', function()
+  harpoon:list():next()
+end, { desc = 'Harpoon next file' })
+
 -- The line beneath this is called `modeline`. See `:help modeline`
 -- vim: ts=2 sts=2 sw=2 et

lua/custom/plugins/init.lua

@@ -1,4 +1,4 @@
--- You can add your own plugins here or in other files in this directory!
+-- Yok can add your own plugins here or in other files in this directory!
 --  I promise not to create any merge conflicts in this directory :)
 --
 -- See the kickstart.nvim README for more information