first bit of tinkering

init.lua

@@ -91,127 +91,16 @@ vim.g.mapleader = ' '
 vim.g.maplocalleader = ' '
 
 -- Set to true if you have a Nerd Font installed and selected in the terminal
-vim.g.have_nerd_font = false
+vim.g.have_nerd_font = true
 
--- [[ Setting options ]]
+-- [[ Options ]]
--- See `:help vim.opt`
+require 'options'
--- NOTE: You can change these options as you wish!
---  For more options, you can see `:help option-list`
-
--- Make line numbers default
-vim.opt.number = true
--- You can also add relative line numbers, to help with jumping.
---  Experiment for yourself to see if you like it!
--- vim.opt.relativenumber = true
-
--- Enable mouse mode, can be useful for resizing splits for example!
-vim.opt.mouse = 'a'
-
--- Don't show the mode, since it's already in the status line
-vim.opt.showmode = false
-
--- Sync clipboard between OS and Neovim.
---  Remove this option if you want your OS clipboard to remain independent.
---  See `:help 'clipboard'`
-vim.opt.clipboard = 'unnamedplus'
-
--- Enable break indent
-vim.opt.breakindent = true
-
--- Save undo history
-vim.opt.undofile = true
-
--- Case-insensitive searching UNLESS \C or one or more capital letters in the search term
-vim.opt.ignorecase = true
-vim.opt.smartcase = true
-
--- Keep signcolumn on by default
-vim.opt.signcolumn = 'yes'
-
--- Decrease update time
-vim.opt.updatetime = 250
-
--- Decrease mapped sequence wait time
--- Displays which-key popup sooner
-vim.opt.timeoutlen = 300
-
--- Configure how new splits should be opened
-vim.opt.splitright = true
-vim.opt.splitbelow = true
-
--- Sets how neovim will display certain whitespace characters in the editor.
---  See `:help 'list'`
---  and `:help 'listchars'`
-vim.opt.list = true
-vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' }
-
--- Preview substitutions live, as you type!
-vim.opt.inccommand = 'split'
-
--- Show which line your cursor is on
-vim.opt.cursorline = true
-
--- Minimal number of screen lines to keep above and below the cursor.
-vim.opt.scrolloff = 10
 
 -- [[ Basic Keymaps ]]
---  See `:help vim.keymap.set()`
+require 'keymaps'
-
--- Set highlight on search, but clear on pressing <Esc> in normal mode
-vim.opt.hlsearch = true
-vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')
-
--- Diagnostic keymaps
-vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous [D]iagnostic message' })
-vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next [D]iagnostic message' })
-vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = 'Show diagnostic [E]rror messages' })
-vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })
-
--- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
--- for people to discover. Otherwise, you normally need to press <C-\><C-n>, which
--- is not what someone will guess without a bit more experience.
---
--- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping
--- or just use <C-\><C-n> to exit terminal mode
-vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })
-
--- TIP: Disable arrow keys in normal mode
--- vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
--- vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
--- vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
--- vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')
-
--- Keybinds to make split navigation easier.
---  Use CTRL+<hjkl> to switch between windows
---
---  See `:help wincmd` for a list of all window commands
-vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' })
-vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' })
-vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
-vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })
-
--- [[ Basic Autocommands ]]
---  See `:help lua-guide-autocommands`
-
--- Highlight when yanking (copying) text
---  Try it with `yap` in normal mode
---  See `:help vim.highlight.on_yank()`
-vim.api.nvim_create_autocmd('TextYankPost', {
-  desc = 'Highlight when yanking (copying) text',
-  group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }),
-  callback = function()
-    vim.highlight.on_yank()
-  end,
-})
 
 -- [[ Install `lazy.nvim` plugin manager ]]
---    See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info
+require 'lazy-bootstrap'
-local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
-if not vim.loop.fs_stat(lazypath) then
-  local lazyrepo = 'https://github.com/folke/lazy.nvim.git'
-  vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
-end ---@diagnostic disable-next-line: undefined-field
-vim.opt.rtp:prepend(lazypath)
 
 -- [[ Configure and install plugins ]]
 --
@@ -228,6 +117,8 @@ require('lazy').setup({
   -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link).
   'tpope/vim-sleuth', -- Detect tabstop and shiftwidth automatically
 
+  require '/kickstart/plugins/harpoon',
+
   -- NOTE: Plugins can also be added by using a table,
   -- with the first argument being the link and the following
   -- keys can be used to configure plugin behavior/loading/etc.
@@ -566,7 +457,7 @@ require('lazy').setup({
       --        For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/
       local servers = {
         -- clangd = {},
-        -- gopls = {},
+        gopls = {},
         -- pyright = {},
         -- rust_analyzer = {},
         -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs

lua/keymaps.lua

@@ -0,0 +1,49 @@
+-- [[Basic Keymaps]]
+--  See `:help vim.keymap.set()`
+
+-- Set highlight on search, but clear on pressing <Esc> in normal mode
+vim.opt.hlsearch = true
+vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')
+
+-- Diagnostic keymaps
+vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous [D]iagnostic message' })
+vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next [D]iagnostic message' })
+vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = 'Show diagnostic [E]rror messages' })
+vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })
+
+-- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
+-- for people to discover. Otherwise, you normally need to press <C-\><C-n>, which
+-- is not what someone will guess without a bit more experience.
+--
+-- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping
+-- or just use <C-\><C-n> to exit terminal mode
+vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })
+
+-- TIP: Disable arrow keys in normal mode
+-- vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
+-- vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
+-- vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
+-- vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')
+
+-- Keybinds to make split navigation easier.
+--  Use CTRL+<hjkl> to switch between windows
+--
+--  See `:help wincmd` for a list of all window commands
+vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' })
+vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' })
+vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
+vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })
+
+-- [[ Basic Autocommands ]]
+--  See `:help lua-guide-autocommands`
+
+-- Highlight when yanking (copying) text
+--  Try it with `yap` in normal mode
+--  See `:help vim.highlight.on_yank()`
+vim.api.nvim_create_autocmd('TextYankPost', {
+  desc = 'Highlight when yanking (copying) text',
+  group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }),
+  callback = function()
+    vim.highlight.on_yank()
+  end,
+})

lua/kickstart/plugins/harpoon.lua

@@ -0,0 +1,28 @@
+return {
+  {
+    "ThePrimeagen/harpoon",
+    branch = "harpoon2",
+    dependencies = { "nvim-lua/plenary.nvim" },
+
+    config = function()
+      local harpoon = require("harpoon")
+      harpoon:setup()
+      --    require('harpoon').setup {
+
+      --    }
+
+      vim.keymap.set('n', '<leader>n', function() harpoon:list():add() end)
+      vim.keymap.set("n", "<C-e>", function() harpoon.ui:toggle_quick_menu(harpoon:list()) end)
+
+      vim.keymap.set("n", "<C-1>", function() harpoon:list():select(1) end)
+      vim.keymap.set("n", "<C-2>", function() harpoon:list():select(2) end)
+      vim.keymap.set("n", "<C-3>", function() harpoon:list():select(3) end)
+      vim.keymap.set("n", "<C-4>", function() harpoon:list():select(4) end)
+
+      -- Toggle previous & next buffers stored within Harpoon list
+      vim.keymap.set("n", "<C-S-P>", function() harpoon:list():prev() end)
+      vim.keymap.set("n", "<C-S-N>", function() harpoon:list():next() end)
+    end,
+
+  },
+}

lua/lazy-bootstrap.lua

@@ -0,0 +1,8 @@
+-- [[ Install `lazy.nvim` plugin manager ]]
+--    See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info
+local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
+if not vim.loop.fs_stat(lazypath) then
+  local lazyrepo = 'https://github.com/folke/lazy.nvim.git'
+  vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
+end ---@diagnostic disable-next-line: undefined-field
+vim.opt.rtp:prepend(lazypath)

lua/options.lua

@@ -0,0 +1,60 @@
+-- [[ Setting options ]]
+-- See `:help vim.opt`
+-- NOTE: You can change these options as you wish!
+--  For more options, you can see `:help option-list`
+
+-- Make line numbers default
+vim.opt.number = true
+-- You can also add relative line numbers, to help with jumping.
+--  Experiment for yourself to see if you like it!
+vim.opt.relativenumber = true
+
+-- Enable mouse mode, can be useful for resizing splits for example!
+vim.opt.mouse = 'a'
+
+-- Don't show the mode, since it's already in the status line
+vim.opt.showmode = false
+
+-- Sync clipboard between OS and Neovim.
+--  Remove this option if you want your OS clipboard to remain independent.
+--  See `:help 'clipboard'`
+vim.opt.clipboard = 'unnamedplus'
+
+-- Enable break indent
+vim.opt.breakindent = true
+
+-- Save undo history
+vim.opt.undofile = true
+
+-- Case-insensitive searching UNLESS \C or one or more capital letters in the search term
+vim.opt.ignorecase = true
+vim.opt.smartcase = true
+
+-- Keep signcolumn on by default
+vim.opt.signcolumn = 'yes'
+
+-- Decrease update time
+vim.opt.updatetime = 250
+
+-- Decrease mapped sequence wait time
+-- Displays which-key popup sooner
+vim.opt.timeoutlen = 300
+
+-- Configure how new splits should be opened
+vim.opt.splitright = true
+vim.opt.splitbelow = true
+
+-- Sets how neovim will display certain whitespace characters in the editor.
+--  See `:help 'list'`
+--  and `:help 'listchars'`
+vim.opt.list = true
+vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' }
+
+-- Preview substitutions live, as you type!
+vim.opt.inccommand = 'split'
+
+-- Show which line your cursor is on
+vim.opt.cursorline = true
+
+-- Minimal number of screen lines to keep above and below the cursor.
+vim.opt.scrolloff = 10