continue refact

init.lua

@@ -7,115 +7,8 @@ vim.g.maplocalleader = ' '
 -- Custom remaps
 require 'custom.remap'
 
--- Set to true if you have a Nerd Font installed and selected in the terminal
-vim.g.have_nerd_font = true
-
--- [[ Setting options ]]
--- See `:help vim.opt`
--- NOTE: You can change these options as you wish!
---  For more options, you can see `:help option-list`
-
--- Make line numbers default
-vim.opt.number = true
--- You can also add relative line numbers, to help with jumping.
---  Experiment for yourself to see if you like it!
-vim.opt.relativenumber = true
-
--- Enable mouse mode, can be useful for resizing splits for example!
-vim.opt.mouse = 'a'
-
--- Don't show the mode, since it's already in the status line
-vim.opt.showmode = false
-
--- Sync clipboard between OS and Neovim.
---  Schedule the setting after `UiEnter` because it can increase startup-time.
---  Remove this option if you want your OS clipboard to remain independent.
---  See `:help 'clipboard'`
-vim.schedule(function()
-  vim.opt.clipboard = 'unnamedplus'
-end)
-
--- Enable break indent
-vim.opt.breakindent = true
-
--- Save undo history
-vim.opt.undofile = true
-
--- Case-insensitive searching UNLESS \C or one or more capital letters in the search term
-vim.opt.ignorecase = true
-vim.opt.smartcase = true
-
--- Keep signcolumn on by default
-vim.opt.signcolumn = 'yes'
-
--- Decrease update time
-vim.opt.updatetime = 250
-
--- Decrease mapped sequence wait time
-vim.opt.timeoutlen = 300
-
--- Configure how new splits should be opened
-vim.opt.splitright = true
-vim.opt.splitbelow = true
-
--- Sets how neovim will display certain whitespace characters in the editor.
---  See `:help 'list'`
---  and `:help 'listchars'`
-vim.opt.list = true
-vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' }
-
--- Preview substitutions live, as you type!
-vim.opt.inccommand = 'split'
-
--- Show which line your cursor is on
-vim.opt.cursorline = true
-
--- Minimal number of screen lines to keep above and below the cursor.
-vim.opt.scrolloff = 10
-
--- if performing an operation that would fail due to unsaved changes in the buffer (like `:q`),
--- instead raise a dialog asking if you wish to save the current file(s)
--- See `:help 'confirm'`
-vim.opt.confirm = true
-
--- [[ Basic Keymaps ]]
---  See `:help vim.keymap.set()`
-
--- Clear highlights on search when pressing <Esc> in normal mode
---  See `:help hlsearch`
-vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')
-
--- Diagnostic keymaps
-vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })
-
--- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
--- for people to discover. Otherwise, you normally need to press <C-\><C-n>, which
--- is not what someone will guess without a bit more experience.
---
--- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping
--- or just use <C-\><C-n> to exit terminal mode
-vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })
-
--- TIP: Disable arrow keys in normal mode
-vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
-vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
-vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
-vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')
-
--- Keybinds to make split navigation easier.
---  Use CTRL+<hjkl> to switch between windows
---
---  See `:help wincmd` for a list of all window commands
-vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' })
-vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' })
-vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
-vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })
-
--- NOTE: Some terminals have colliding keymaps or are not able to send distinct keycodes
--- vim.keymap.set("n", "<C-S-h>", "<C-w>H", { desc = "Move window to the left" })
--- vim.keymap.set("n", "<C-S-l>", "<C-w>L", { desc = "Move window to the right" })
--- vim.keymap.set("n", "<C-S-j>", "<C-w>J", { desc = "Move window to the lower" })
--- vim.keymap.set("n", "<C-S-k>", "<C-w>K", { desc = "Move window to the upper" })
+-- Sets
+require 'custom.sets'
 
 -- [[ Basic Autocommands ]]
 --  See `:help lua-guide-autocommands`

lua/custom/remap.lua

@@ -12,3 +12,42 @@ vim.api.nvim_set_hl(0, 'NormalFloat', { bg = 'none' })
 
 -- Undotree
 vim.keymap.set('n', '<F5>', vim.cmd.UndotreeToggle)
+
+-- [[ Basic Keymaps ]]
+--  See `:help vim.keymap.set()`
+
+-- Clear highlights on search when pressing <Esc> in normal mode
+--  See `:help hlsearch`
+vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')
+
+-- Diagnostic keymaps
+vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })
+
+-- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
+-- for people to discover. Otherwise, you normally need to press <C-\><C-n>, which
+-- is not what someone will guess without a bit more experience.
+--
+-- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping
+-- or just use <C-\><C-n> to exit terminal mode
+vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })
+
+-- TIP: Disable arrow keys in normal mode
+vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
+vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
+vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
+vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')
+
+-- Keybinds to make split navigation easier.
+--  Use CTRL+<hjkl> to switch between windows
+--
+--  See `:help wincmd` for a list of all window commands
+vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' })
+vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' })
+vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
+vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })
+
+-- NOTE: Some terminals have colliding keymaps or are not able to send distinct keycodes
+-- vim.keymap.set("n", "<C-S-h>", "<C-w>H", { desc = "Move window to the left" })
+-- vim.keymap.set("n", "<C-S-l>", "<C-w>L", { desc = "Move window to the right" })
+-- vim.keymap.set("n", "<C-S-j>", "<C-w>J", { desc = "Move window to the lower" })
+-- vim.keymap.set("n", "<C-S-k>", "<C-w>K", { desc = "Move window to the upper" })

lua/custom/sets.lua

@@ -0,0 +1,70 @@
+-- Set to true if you have a Nerd Font installed and selected in the terminal
+vim.g.have_nerd_font = true
+
+-- [[ Setting options ]]
+-- See `:help vim.opt`
+-- NOTE: You can change these options as you wish!
+--  For more options, you can see `:help option-list`
+
+-- Make line numbers default
+vim.opt.number = true
+-- You can also add relative line numbers, to help with jumping.
+--  Experiment for yourself to see if you like it!
+vim.opt.relativenumber = true
+
+-- Enable mouse mode, can be useful for resizing splits for example!
+vim.opt.mouse = 'a'
+
+-- Don't show the mode, since it's already in the status line
+vim.opt.showmode = false
+
+-- Sync clipboard between OS and Neovim.
+--  Schedule the setting after `UiEnter` because it can increase startup-time.
+--  Remove this option if you want your OS clipboard to remain independent.
+--  See `:help 'clipboard'`
+vim.schedule(function()
+  vim.opt.clipboard = 'unnamedplus'
+end)
+
+-- Enable break indent
+vim.opt.breakindent = true
+
+-- Save undo history
+vim.opt.undofile = true
+
+-- Case-insensitive searching UNLESS \C or one or more capital letters in the search term
+vim.opt.ignorecase = true
+vim.opt.smartcase = true
+
+-- Keep signcolumn on by default
+vim.opt.signcolumn = 'yes'
+
+-- Decrease update time
+vim.opt.updatetime = 250
+
+-- Decrease mapped sequence wait time
+vim.opt.timeoutlen = 300
+
+-- Configure how new splits should be opened
+vim.opt.splitright = true
+vim.opt.splitbelow = true
+
+-- Sets how neovim will display certain whitespace characters in the editor.
+--  See `:help 'list'`
+--  and `:help 'listchars'`
+vim.opt.list = true
+vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' }
+
+-- Preview substitutions live, as you type!
+vim.opt.inccommand = 'split'
+
+-- Show which line your cursor is on
+vim.opt.cursorline = true
+
+-- Minimal number of screen lines to keep above and below the cursor.
+vim.opt.scrolloff = 10
+
+-- if performing an operation that would fail due to unsaved changes in the buffer (like `:q`),
+-- instead raise a dialog asking if you wish to save the current file(s)
+-- See `:help 'confirm'`
+vim.opt.confirm = true

package-lock.json

@@ -0,0 +1,6 @@
+{
+  "name": "nvim",
+  "lockfileVersion": 3,
+  "requires": true,
+  "packages": {}
+}