diff --git a/.gitignore b/.gitignore index 005b535b..d12a5c88 100644 --- a/.gitignore +++ b/.gitignore @@ -4,4 +4,9 @@ test.sh nvim spell/ + +# You can uncomment this yourself if you want to lock the lazy-lock.json, +# but for kickstart, it makes sense to leave it ignored. lazy-lock.json + +.DS_Store diff --git a/.stylua.toml b/.stylua.toml index 139e9397..edfa5067 100644 --- a/.stylua.toml +++ b/.stylua.toml @@ -4,3 +4,4 @@ indent_type = "Spaces" indent_width = 2 quote_style = "AutoPreferSingle" call_parentheses = "None" +collapse_simple_statement = "Always" diff --git a/README.md b/README.md index 41139505..2b9e52da 100644 --- a/README.md +++ b/README.md @@ -17,7 +17,14 @@ A starting point for Neovim that is: Kickstart.nvim targets *only* the latest ['stable'](https://github.com/neovim/neovim/releases/tag/stable) and latest ['nightly'](https://github.com/neovim/neovim/releases/tag/nightly) of Neovim. -If you are experiencing issues, please make sure you have the latest versions. +If you are experiencing issues, please make sure you have at least the latest +stable version. Most likely, you want to install neovim via a [package +manager](https://github.com/neovim/neovim/blob/master/INSTALL.md#install-from-package). +To check your neovim version, run `nvim --version` and make sure it is not +below the latest +['stable'](https://github.com/neovim/neovim/releases/tag/stable) version. If +your chosen install method only gives you an outdated version of neovim, find +alternative [installation methods below](#alternative-neovim-installation-methods). ### Install External Dependencies @@ -154,7 +161,7 @@ examples of adding popularly requested plugins. Below you can find OS specific install instructions for Neovim and dependencies. -After installing all the dependencies continue with the [Install Kickstart](#Install-Kickstart) step. +After installing all the dependencies continue with the [Install Kickstart](#install-kickstart) step. #### Windows Installation @@ -239,3 +246,77 @@ sudo pacman -S --noconfirm --needed gcc make git ripgrep fd unzip neovim ``` +### Alternative neovim installation methods + +For some systems it is not unexpected that the [package manager installation +method](https://github.com/neovim/neovim/blob/master/INSTALL.md#install-from-package) +recommended by neovim is significantly behind. If that is the case for you, +pick one of the following methods that are known to deliver fresh neovim versions very quickly. +They have been picked for their popularity and because they make installing and updating +neovim to the latest versions easy. You can also find more detail about the +available methods being discussed +[here](https://github.com/nvim-lua/kickstart.nvim/issues/1583). + + +
Bob + +[Bob](https://github.com/MordechaiHadad/bob) is a Neovim version manager for +all plattforms. Simply install +[rustup](https://rust-lang.github.io/rustup/installation/other.html), +and run the following commands: + +```bash +rustup default stable +rustup update stable +cargo install bob-nvim +bob use stable +``` + +
+ +
Homebrew + +[Homebrew](https://brew.sh) is a package manager popular on Mac and Linux. +Simply install using [`brew install`](https://formulae.brew.sh/formula/neovim). + +
+ +
Flatpak + +Flatpak is a package manager for applications that allows developers to package their applications +just once to make it available on all Linux systems. Simply [install flatpak](https://flatpak.org/setup/) +and setup [flathub](https://flathub.org/setup) to [install neovim](https://flathub.org/apps/io.neovim.nvim). + +
+ +
asdf and mise-en-place + +[asdf](https://asdf-vm.com/) and [mise](https://mise.jdx.dev/) are tool version managers, +mostly aimed towards project-specific tool versioning. However both support managing tools +globally in the user-space as well: + +
mise + +[Install mise](https://mise.jdx.dev/getting-started.html), then run: + +```bash +mise plugins install neovim +mise use neovim@stable +``` + +
+ +
asdf + +[Install asdf](https://asdf-vm.com/guide/getting-started.html), then run: + +```bash +asdf plugin add neovim +asdf install neovim stable +asdf set neovim stable --home +asdf reshim neovim +``` + +
+ +
diff --git a/init.lua b/init.lua index 259db9f2..26ab81ad 100644 --- a/init.lua +++ b/init.lua @@ -91,7 +91,7 @@ vim.g.mapleader = ' ' vim.g.maplocalleader = ' ' -- Set to true if you have a Nerd Font installed and selected in the terminal -vim.g.have_nerd_font = false +vim.g.have_nerd_font = true -- [[ Setting options ]] -- See `:help vim.o` @@ -114,9 +114,7 @@ vim.o.showmode = false -- Schedule the setting after `UiEnter` because it can increase startup-time. -- Remove this option if you want your OS clipboard to remain independent. -- See `:help 'clipboard'` -vim.schedule(function() - vim.o.clipboard = 'unnamedplus' -end) +vim.schedule(function() vim.o.clipboard = 'unnamedplus' end) -- Enable break indent vim.o.breakindent = true @@ -150,12 +148,12 @@ vim.o.splitbelow = true -- See `:help lua-options` -- and `:help lua-options-guide` vim.o.list = false -vim.o.autoindent = true -- Disable auto-indentation -vim.o.smartindent = true -- Disable smart indentation -vim.o.cindent = false -- Disable C-style indentation -vim.o.expandtab = true -- Ensure tabs are converted to spaces -vim.o.shiftwidth = 3 -- No extra spaces for indentation -vim.o.tabstop = 3 -- One space per tab +vim.o.autoindent = true -- Enable auto-indentation +vim.o.smartindent = true -- Enable smart indentation +vim.o.cindent = false -- Disable C-style indentation +vim.o.expandtab = true -- Ensure tabs are converted to spaces +vim.o.shiftwidth = 3 -- Set indentation width to 3 spaces +vim.o.tabstop = 3 -- One space per tab vim.o.softtabstop = 3 --vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' } @@ -180,7 +178,22 @@ vim.o.confirm = true -- See `:help hlsearch` vim.keymap.set('n', '', 'nohlsearch') --- Diagnostic keymaps +-- Diagnostic Config & Keymaps +-- See :help vim.diagnostic.Opts +vim.diagnostic.config { + update_in_insert = false, + severity_sort = true, + float = { border = 'rounded', source = 'if_many' }, + underline = { severity = vim.diagnostic.severity.ERROR }, + + -- Can switch between these as you prefer + virtual_text = true, -- Text shows up at the end of the line + virtual_lines = false, -- Teest shows up underneath the line, with virtual lines + + -- Auto open the float, so you can easily read the errors when jumping with `[d` and `]d` + jump = { float = true }, +} + vim.keymap.set('n', 'q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' }) -- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier @@ -221,9 +234,7 @@ vim.keymap.set('n', '', '', { desc = 'Move focus to the upper win vim.api.nvim_create_autocmd('TextYankPost', { desc = 'Highlight when yanking (copying) text', group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }), - callback = function() - vim.hl.on_yank() - end, + callback = function() vim.hl.on_yank() end, }) -- [[ Install `lazy.nvim` plugin manager ]] @@ -232,9 +243,7 @@ local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim' if not (vim.uv or vim.loop).fs_stat(lazypath) then local lazyrepo = 'https://github.com/folke/lazy.nvim.git' local out = vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath } - if vim.v.shell_error ~= 0 then - error('Error cloning lazy.nvim:\n' .. out) - end + if vim.v.shell_error ~= 0 then error('Error cloning lazy.nvim:\n' .. out) end end ---@type vim.Option @@ -253,15 +262,8 @@ rtp:prepend(lazypath) -- -- NOTE: Here is where you install your plugins. require('lazy').setup({ - -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link). - 'NMAC427/guess-indent.nvim', -- Detect tabstop and shiftwidth automatically - - -- NOTE: Plugins can also be added by using a table, - -- with the first argument being the link and the following - -- keys can be used to configure plugin behavior/loading/etc. - -- - -- Use `opts = {}` to automatically pass options to a plugin's `setup()` function, forcing the plugin to be loaded. - -- + -- NOTE: Plugins can be added via a link or github org/name. To run setup automatically, use `opts = {}` + { 'NMAC427/guess-indent.nvim', opts = {} }, -- Alternatively, use `config = function() ... end` for full control over the configuration. -- If you prefer to call `setup` explicitly, use: @@ -307,51 +309,15 @@ require('lazy').setup({ { -- Useful plugin to show you pending keybinds. 'folke/which-key.nvim', - event = 'VimEnter', -- Sets the loading event to 'VimEnter' + event = 'VimEnter', opts = { -- delay between pressing a key and opening which-key (milliseconds) - -- this setting is independent of vim.o.timeoutlen delay = 0, - icons = { - -- set icon mappings to true if you have a Nerd Font - mappings = vim.g.have_nerd_font, - -- If you are using a Nerd Font: set icons.keys to an empty table which will use the - -- default which-key.nvim defined Nerd Font icons, otherwise define a string table - keys = vim.g.have_nerd_font and {} or { - Up = ' ', - Down = ' ', - Left = ' ', - Right = ' ', - C = ' ', - M = ' ', - D = ' ', - S = ' ', - CR = ' ', - Esc = ' ', - ScrollWheelDown = ' ', - ScrollWheelUp = ' ', - NL = ' ', - BS = ' ', - Space = ' ', - Tab = ' ', - F1 = '', - F2 = '', - F3 = '', - F4 = '', - F5 = '', - F6 = '', - F7 = '', - F8 = '', - F9 = '', - F10 = '', - F11 = '', - F12 = '', - }, - }, + icons = { mappings = vim.g.have_nerd_font }, -- Document existing key chains spec = { - { 's', group = '[S]earch' }, + { 's', group = '[S]earch', mode = { 'n', 'v' } }, { 't', group = '[T]oggle' }, { 'h', group = 'Git [H]unk', mode = { 'n', 'v' } }, }, @@ -367,6 +333,16 @@ require('lazy').setup({ { -- Fuzzy Finder (files, lsp, etc) 'nvim-telescope/telescope.nvim', + -- By default, Telescope is included and acts as your picker for everything. + + -- If you would like to switch to a different picker (like snacks, or fzf-lua) + -- you can disable the Telescope plugin by setting enabled to false and enable + -- your replacement picker by requiring it explicitly (e.g. 'custom.plugins.snacks') + + -- Note: If you customize your config for yourself, + -- it’s best to remove the Telescope plugin config entirely + -- instead of just disabling it here, to keep your config clean. + enabled = true, event = 'VimEnter', dependencies = { 'nvim-lua/plenary.nvim', @@ -379,14 +355,12 @@ require('lazy').setup({ -- `cond` is a condition used to determine whether this plugin should be -- installed and loaded. - cond = function() - return vim.fn.executable 'make' == 1 - end, + cond = function() return vim.fn.executable 'make' == 1 end, }, { 'nvim-telescope/telescope-ui-select.nvim' }, -- Useful for getting pretty icons, but requires a Nerd Font. - { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font }, + { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font }, }, config = function() -- Telescope is a fuzzy finder that comes with a lot of different things that @@ -421,9 +395,7 @@ require('lazy').setup({ -- }, -- pickers = {} extensions = { - ['ui-select'] = { - require('telescope.themes').get_dropdown(), - }, + ['ui-select'] = { require('telescope.themes').get_dropdown() }, }, } @@ -437,14 +409,50 @@ require('lazy').setup({ vim.keymap.set('n', 'sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' }) vim.keymap.set('n', 'sf', builtin.find_files, { desc = '[S]earch [F]iles' }) vim.keymap.set('n', 'ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' }) - vim.keymap.set('n', 'sw', builtin.grep_string, { desc = '[S]earch current [W]ord' }) + vim.keymap.set({ 'n', 'v' }, 'sw', builtin.grep_string, { desc = '[S]earch current [W]ord' }) vim.keymap.set('n', 'sg', builtin.live_grep, { desc = '[S]earch by [G]rep' }) vim.keymap.set('n', 'sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' }) vim.keymap.set('n', 'sr', builtin.resume, { desc = '[S]earch [R]esume' }) vim.keymap.set('n', 's.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' }) + vim.keymap.set('n', 'sc', builtin.commands, { desc = '[S]earch [C]ommands' }) vim.keymap.set('n', '', builtin.buffers, { desc = '[ ] Find existing buffers' }) - -- Slightly advanced example of overriding default behavior and theme + -- This runs on LSP attach per buffer (see main LSP attach function in 'neovim/nvim-lspconfig' config for more info, + -- it is better explained there). This allows easily switching between pickers if you prefer using something else! + vim.api.nvim_create_autocmd('LspAttach', { + group = vim.api.nvim_create_augroup('telescope-lsp-attach', { clear = true }), + callback = function(event) + local buf = event.buf + + -- Find references for the word under your cursor. + vim.keymap.set('n', 'grr', builtin.lsp_references, { buffer = buf, desc = '[G]oto [R]eferences' }) + + -- Jump to the implementation of the word under your cursor. + -- Useful when your language has ways of declaring types without an actual implementation. + vim.keymap.set('n', 'gri', builtin.lsp_implementations, { buffer = buf, desc = '[G]oto [I]mplementation' }) + + -- Jump to the definition of the word under your cursor. + -- This is where a variable was first declared, or where a function is defined, etc. + -- To jump back, press . + vim.keymap.set('n', 'grd', builtin.lsp_definitions, { buffer = buf, desc = '[G]oto [D]efinition' }) + + -- Fuzzy find all the symbols in your current document. + -- Symbols are things like variables, functions, types, etc. + vim.keymap.set('n', 'gO', builtin.lsp_document_symbols, { buffer = buf, desc = 'Open Document Symbols' }) + + -- Fuzzy find all the symbols in your current workspace. + -- Similar to document symbols, except searches over your entire project. + vim.keymap.set('n', 'gW', builtin.lsp_dynamic_workspace_symbols, + { buffer = buf, desc = 'Open Workspace Symbols' }) + + -- Jump to the type of the word under your cursor. + -- Useful when you're not sure what type a variable is and you want to see + -- the definition of its *type*, not where it was *defined*. + vim.keymap.set('n', 'grt', builtin.lsp_type_definitions, { buffer = buf, desc = '[G]oto [T]ype Definition' }) + end, + }) + + -- Override default behavior and theme when searching vim.keymap.set('n', '/', function() -- You can pass additional configuration to Telescope to change the theme, layout, etc. builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown { @@ -455,33 +463,25 @@ require('lazy').setup({ -- It's also possible to pass additional configuration options. -- See `:help telescope.builtin.live_grep()` for information about particular keys - vim.keymap.set('n', 's/', function() - builtin.live_grep { - grep_open_files = true, - prompt_title = 'Live Grep in Open Files', - } - end, { desc = '[S]earch [/] in Open Files' }) + vim.keymap.set( + 'n', + 's/', + function() + builtin.live_grep { + grep_open_files = true, + prompt_title = 'Live Grep in Open Files', + } + end, + { desc = '[S]earch [/] in Open Files' } + ) -- Shortcut for searching your Neovim configuration files - vim.keymap.set('n', 'sn', function() - builtin.find_files { cwd = vim.fn.stdpath 'config' } - end, { desc = '[S]earch [N]eovim files' }) + vim.keymap.set('n', 'sn', function() builtin.find_files { cwd = vim.fn.stdpath 'config' } end, + { desc = '[S]earch [N]eovim files' }) end, }, -- LSP Plugins - { - -- `lazydev` configures Lua LSP for your Neovim config, runtime and plugins - -- used for completion, annotations and signatures of Neovim apis - 'folke/lazydev.nvim', - ft = 'lua', - opts = { - library = { - -- Load luvit types when the `vim.uv` word is found - { path = '${3rd}/luv/library', words = { 'vim%.uv' } }, - }, - }, - }, { -- Main LSP Configuration 'neovim/nvim-lspconfig', @@ -490,11 +490,10 @@ require('lazy').setup({ -- Mason must be loaded before its dependents so we need to set it up here. -- NOTE: `opts = {}` is the same as calling `require('mason').setup({})` { 'mason-org/mason.nvim', opts = {} }, - 'mason-org/mason-lspconfig.nvim', 'WhoIsSethDaniel/mason-tool-installer.nvim', -- Useful status updates for LSP. - { 'j-hui/fidget.nvim', opts = {} }, + { 'j-hui/fidget.nvim', opts = {} }, -- Allows extra capabilities provided by blink.cmp 'saghen/blink.cmp', @@ -550,55 +549,17 @@ require('lazy').setup({ -- or a suggestion from your LSP for this to activate. map('gra', vim.lsp.buf.code_action, '[G]oto Code [A]ction', { 'n', 'x' }) - -- Find references for the word under your cursor. - map('grr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences') - - -- Jump to the implementation of the word under your cursor. - -- Useful when your language has ways of declaring types without an actual implementation. - map('gri', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation') - - -- Jump to the definition of the word under your cursor. - -- This is where a variable was first declared, or where a function is defined, etc. - -- To jump back, press . - map('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition') - -- WARN: This is not Goto Definition, this is Goto Declaration. -- For example, in C this would take you to the header. map('grD', vim.lsp.buf.declaration, '[G]oto [D]eclaration') - -- Fuzzy find all the symbols in your current document. - -- Symbols are things like variables, functions, types, etc. - map('gO', require('telescope.builtin').lsp_document_symbols, 'Open Document Symbols') - - -- Fuzzy find all the symbols in your current workspace. - -- Similar to document symbols, except searches over your entire project. - map('gW', require('telescope.builtin').lsp_dynamic_workspace_symbols, 'Open Workspace Symbols') - - -- Jump to the type of the word under your cursor. - -- Useful when you're not sure what type a variable is and you want to see - -- the definition of its *type*, not where it was *defined*. - map('grt', require('telescope.builtin').lsp_type_definitions, '[G]oto [T]ype Definition') - - -- This function resolves a difference between neovim nightly (version 0.11) and stable (version 0.10) - ---@param client vim.lsp.Client - ---@param method vim.lsp.protocol.Method - ---@param bufnr? integer some lsp support methods only in specific files - ---@return boolean - local function client_supports_method(client, method, bufnr) - if vim.fn.has 'nvim-0.11' == 1 then - return client:supports_method(method, bufnr) - else - return client.supports_method(method, { bufnr = bufnr }) - end - end - -- The following two autocommands are used to highlight references of the -- word under your cursor when your cursor rests there for a little while. -- See `:help CursorHold` for information about when this is executed -- -- When you move your cursor, the highlights will be cleared (the second autocommand). local client = vim.lsp.get_client_by_id(event.data.client_id) - if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_documentHighlight, event.buf) then + if client and client:supports_method('textDocument/documentHighlight', event.buf) then local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false }) vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, { buffer = event.buf, @@ -625,43 +586,14 @@ require('lazy').setup({ -- code, if the language server you are using supports them -- -- This may be unwanted, since they displace some of your code - if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_inlayHint, event.buf) then - map('th', function() - vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled { bufnr = event.buf }) - end, '[T]oggle Inlay [H]ints') + if client and client:supports_method('textDocument/inlayHint', event.buf) then + map('th', + function() vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled { bufnr = event.buf }) end, + '[T]oggle Inlay [H]ints') end end, }) - -- Diagnostic Config - -- See :help vim.diagnostic.Opts - vim.diagnostic.config { - severity_sort = true, - float = { border = 'rounded', source = 'if_many' }, - underline = { severity = vim.diagnostic.severity.ERROR }, - signs = vim.g.have_nerd_font and { - text = { - [vim.diagnostic.severity.ERROR] = '󰅚 ', - [vim.diagnostic.severity.WARN] = '󰀪 ', - [vim.diagnostic.severity.INFO] = '󰋽 ', - [vim.diagnostic.severity.HINT] = '󰌶 ', - }, - } or {}, - virtual_text = { - source = 'if_many', - spacing = 2, - format = function(diagnostic) - local diagnostic_message = { - [vim.diagnostic.severity.ERROR] = diagnostic.message, - [vim.diagnostic.severity.WARN] = diagnostic.message, - [vim.diagnostic.severity.INFO] = diagnostic.message, - [vim.diagnostic.severity.HINT] = diagnostic.message, - } - return diagnostic_message[diagnostic.severity] - end, - }, - } - -- LSP servers and clients are able to communicate to each other what features they support. -- By default, Neovim doesn't support everything that is in the LSP specification. -- When you add blink.cmp, luasnip, etc. Neovim now has *more* capabilities. @@ -670,13 +602,7 @@ require('lazy').setup({ -- Enable the following language servers -- Feel free to add/remove any LSPs that you want here. They will automatically be installed. - -- - -- Add any additional override configuration in the following tables. Available keys are: - -- - cmd (table): Override the default command used to start the server - -- - filetypes (table): Override the default list of associated filetypes for the server - -- - capabilities (table): Override fields in capabilities. Can be used to disable certain LSP features. - -- - settings (table): Override the default settings passed when initializing the server. - -- For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/ + -- See `:help lsp-config` for information about keys and how to configure local servers = { clangd = {}, --gopls = {}, @@ -701,45 +627,55 @@ require('lazy').setup({ callSnippet = 'Replace', }, -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings - -- diagnostics = { disable = { 'missing-fields' } }, + diagnostics = { disable = { 'missing-fields' } }, }, }, + on_init = function(client) + if client.workspace_folders then + local path = client.workspace_folders[1].name + if path ~= vim.fn.stdpath 'config' and (vim.uv.fs_stat(path .. '/.luarc.json') or vim.uv.fs_stat(path .. '/.luarc.jsonc')) then return end + end + + client.config.settings.Lua = vim.tbl_deep_extend('force', client.config.settings.Lua, { + runtime = { + version = 'LuaJIT', + path = { 'lua/?.lua', 'lua/?/init.lua' }, + }, + workspace = { + checkThirdParty = false, + -- NOTE: this is a lot slower and will cause issues when working on your own configuration. + -- See https://github.com/neovim/nvim-lspconfig/issues/3189 + library = vim.api.nvim_get_runtime_file('', true), + }, + }) + end, }, } -- Ensure the servers and tools above are installed - -- - -- To check the current status of installed tools and/or manually install - -- other tools, you can run - -- :Mason - -- - -- You can press `g?` for help in this menu. - -- - -- `mason` had to be setup earlier: to configure its options see the - -- `dependencies` table for `nvim-lspconfig` above. - -- - -- You can add other tools here that you want Mason to install - -- for you, so that they are available from within Neovim. local ensure_installed = vim.tbl_keys(servers or {}) vim.list_extend(ensure_installed, { 'stylua', -- Used to format Lua code + -- You can add other tools here that you want Mason to install }) + + -- Map LSP names to Mason names if they differ + local package_mapping = { + rust_analyzer = 'rust-analyzer', + ts_ls = 'typescript-language-server', + lua_ls = 'lua-language-server', + } + for i, name in ipairs(ensure_installed) do + if package_mapping[name] then ensure_installed[i] = package_mapping[name] end + end + require('mason-tool-installer').setup { ensure_installed = ensure_installed } - require('mason-lspconfig').setup { - ensure_installed = {}, -- explicitly set to an empty table (Kickstart populates installs via mason-tool-installer) - automatic_installation = false, - handlers = { - function(server_name) - local server = servers[server_name] or {} - -- This handles overriding only values explicitly passed - -- by the server configuration above. Useful when disabling - -- certain features of an LSP (for example, turning off formatting for ts_ls) - server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {}) - require('lspconfig')[server_name].setup(server) - end, - }, - } + for name, server in pairs(servers) do + server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {}) + vim.lsp.config(name, server) + vim.lsp.enable(name) + end end, }, @@ -750,9 +686,7 @@ require('lazy').setup({ keys = { { 'f', - function() - require('conform').format { async = true, lsp_format = 'fallback' } - end, + function() require('conform').format { async = true, lsp_format = 'fallback' } end, mode = '', desc = '[F]ormat buffer', }, @@ -797,9 +731,7 @@ require('lazy').setup({ -- Build Step is needed for regex support in snippets. -- This step is not supported in many windows environments. -- Remove the below condition to re-enable on windows. - if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then - return - end + if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then return end return 'make install_jsregexp' end)(), dependencies = { @@ -815,7 +747,6 @@ require('lazy').setup({ }, opts = {}, }, - 'folke/lazydev.nvim', }, --- @module 'blink.cmp' --- @type blink.cmp.Config @@ -832,7 +763,7 @@ require('lazy').setup({ -- For an understanding of why the 'default' preset is recommended, -- you will need to read `:help ins-completion` -- - [''] = { 'select_next' }, -- Tab selects next item + [''] = { 'select_next' }, -- Tab selects next item [''] = { 'select_prev' }, -- Shift+Tab selects previous [''] = { 'select_and_accept', 'fallback' }, -- All presets have the following mappings: @@ -867,10 +798,7 @@ require('lazy').setup({ }, sources = { - default = { 'lsp', 'path', 'snippets', 'lazydev' }, - providers = { - lazydev = { module = 'lazydev.integrations.blink', score_offset = 100 }, - }, + default = { 'lsp', 'path', 'snippets' }, }, snippets = { preset = 'luasnip' }, @@ -900,31 +828,21 @@ require('lazy').setup({ -- end, -- }, -- Or with configuration - { -- You can easily change to a different colorscheme. - -- Change the name of the colorscheme plugin below, and then - -- change the command in the config to whatever the name of that colorscheme is. - -- - -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`. - 'folke/tokyonight.nvim', - priority = 1000, -- Make sure to load this before all the other start plugins. + { + 'rebelot/kanagawa.nvim', + priority = 1000, config = function() - ---@diagnostic disable-next-line: missing-fields - require('tokyonight').setup { - styles = { - comments = { italic = false }, -- Disable italics in comments - }, + require('kanagawa').setup { + commentStyle = { italic = false }, + keywordStyle = { italic = false }, } - - -- Load the colorscheme here. - -- Like many other themes, this one has different styles, and you could load - -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'. - vim.cmd.colorscheme 'tokyonight-night' + vim.cmd.colorscheme 'kanagawa-wave' end, }, - { 'folke/todo-comments.nvim', event = 'VimEnter', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } }, + { 'folke/todo-comments.nvim', event = 'VimEnter', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } }, { -- Collection of various small independent plugins/modules - 'echasnovski/mini.nvim', + 'nvim-mini/mini.nvim', config = function() -- Better Around/Inside textobjects -- @@ -952,18 +870,18 @@ require('lazy').setup({ -- default behavior. For example, here we set the section for -- cursor location to LINE:COLUMN ---@diagnostic disable-next-line: duplicate-set-field - statusline.section_location = function() - return '%2l:%-2v' - end + statusline.section_location = function() return '%2l:%-2v' end -- ... and there is more! - -- Check out: https://github.com/echasnovski/mini.nvim + -- Check out: https://github.com/nvim-mini/mini.nvim end, }, + { -- Highlight, edit, and navigate code 'nvim-treesitter/nvim-treesitter', build = ':TSUpdate', - main = 'nvim-treesitter.configs', -- Sets main module to use for opts + branch = 'master', -- Add this to stay on the stable branch + -- main = 'nvim-treesitter.configs', -- [[ Configure Treesitter ]] See `:help nvim-treesitter` opts = { ensure_installed = { 'bash', 'diff', 'html', 'lua', 'luadoc', 'markdown', 'markdown_inline', 'query', 'vim', 'vimdoc' }, @@ -996,7 +914,7 @@ require('lazy').setup({ -- Uncomment any of the lines below to enable them (you will need to restart nvim). -- -- require 'kickstart.plugins.debug', - -- require 'kickstart.plugins.indent_line', + require 'kickstart.plugins.indent_line', require 'kickstart.plugins.lint', require 'kickstart.plugins.autopairs', -- require 'kickstart.plugins.neo-tree', diff --git a/lua/kickstart/health.lua b/lua/kickstart/health.lua index b59d0864..ca684516 100644 --- a/lua/kickstart/health.lua +++ b/lua/kickstart/health.lua @@ -12,7 +12,7 @@ local check_version = function() return end - if vim.version.ge(vim.version(), '0.10-dev') then + if vim.version.ge(vim.version(), '0.11') then vim.health.ok(string.format("Neovim version is: '%s'", verstr)) else vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr)) diff --git a/lua/kickstart/plugins/debug.lua b/lua/kickstart/plugins/debug.lua index 8e332bf2..1e3570f9 100644 --- a/lua/kickstart/plugins/debug.lua +++ b/lua/kickstart/plugins/debug.lua @@ -28,52 +28,38 @@ return { -- Basic debugging keymaps, feel free to change to your liking! { '', - function() - require('dap').continue() - end, + function() require('dap').continue() end, desc = 'Debug: Start/Continue', }, { '', - function() - require('dap').step_into() - end, + function() require('dap').step_into() end, desc = 'Debug: Step Into', }, { '', - function() - require('dap').step_over() - end, + function() require('dap').step_over() end, desc = 'Debug: Step Over', }, { '', - function() - require('dap').step_out() - end, + function() require('dap').step_out() end, desc = 'Debug: Step Out', }, { 'b', - function() - require('dap').toggle_breakpoint() - end, + function() require('dap').toggle_breakpoint() end, desc = 'Debug: Toggle Breakpoint', }, { 'B', - function() - require('dap').set_breakpoint(vim.fn.input 'Breakpoint condition: ') - end, + function() require('dap').set_breakpoint(vim.fn.input 'Breakpoint condition: ') end, desc = 'Debug: Set Breakpoint', }, -- Toggle to see last session result. Without this, you can't see session output in case of unhandled exception. { '', - function() - require('dapui').toggle() - end, + function() require('dapui').toggle() end, desc = 'Debug: See last session result.', }, }, diff --git a/lua/kickstart/plugins/gitsigns.lua b/lua/kickstart/plugins/gitsigns.lua index cbbd22d2..777e470a 100644 --- a/lua/kickstart/plugins/gitsigns.lua +++ b/lua/kickstart/plugins/gitsigns.lua @@ -34,12 +34,8 @@ return { -- Actions -- visual mode - map('v', 'hs', function() - gitsigns.stage_hunk { vim.fn.line '.', vim.fn.line 'v' } - end, { desc = 'git [s]tage hunk' }) - map('v', 'hr', function() - gitsigns.reset_hunk { vim.fn.line '.', vim.fn.line 'v' } - end, { desc = 'git [r]eset hunk' }) + map('v', 'hs', function() gitsigns.stage_hunk { vim.fn.line '.', vim.fn.line 'v' } end, { desc = 'git [s]tage hunk' }) + map('v', 'hr', function() gitsigns.reset_hunk { vim.fn.line '.', vim.fn.line 'v' } end, { desc = 'git [r]eset hunk' }) -- normal mode map('n', 'hs', gitsigns.stage_hunk, { desc = 'git [s]tage hunk' }) map('n', 'hr', gitsigns.reset_hunk, { desc = 'git [r]eset hunk' }) @@ -49,9 +45,7 @@ return { map('n', 'hp', gitsigns.preview_hunk, { desc = 'git [p]review hunk' }) map('n', 'hb', gitsigns.blame_line, { desc = 'git [b]lame line' }) map('n', 'hd', gitsigns.diffthis, { desc = 'git [d]iff against index' }) - map('n', 'hD', function() - gitsigns.diffthis '@' - end, { desc = 'git [D]iff against last commit' }) + map('n', 'hD', function() gitsigns.diffthis '@' end, { desc = 'git [D]iff against last commit' }) -- Toggles map('n', 'tb', gitsigns.toggle_current_line_blame, { desc = '[T]oggle git show [b]lame line' }) map('n', 'tD', gitsigns.preview_hunk_inline, { desc = '[T]oggle git show [D]eleted' }) diff --git a/lua/kickstart/plugins/indent_line.lua b/lua/kickstart/plugins/indent_line.lua index ed7f2693..770ef68b 100644 --- a/lua/kickstart/plugins/indent_line.lua +++ b/lua/kickstart/plugins/indent_line.lua @@ -4,6 +4,13 @@ return { -- Enable `lukas-reineke/indent-blankline.nvim` -- See `:help ibl` main = 'ibl', - opts = {}, + opts = { + indent = { + char = '┊', -- Thinner/dotted guide + }, + scope = { + enabled = false, -- Disabling scope highlight makes it feel less "big" + }, + }, }, } diff --git a/lua/kickstart/plugins/lint.lua b/lua/kickstart/plugins/lint.lua index dec42f09..f8a73485 100644 --- a/lua/kickstart/plugins/lint.lua +++ b/lua/kickstart/plugins/lint.lua @@ -50,9 +50,7 @@ return { -- Only run the linter in buffers that you can modify in order to -- avoid superfluous noise, notably within the handy LSP pop-ups that -- describe the hovered symbol using Markdown. - if vim.bo.modifiable then - lint.try_lint() - end + if vim.bo.modifiable then lint.try_lint() end end, }) end,