first setup try

init.lua

@@ -1,110 +1,15 @@
---[[
-
-=====================================================================
-==================== READ THIS BEFORE CONTINUING ====================
-=====================================================================
-========                                    .-----.          ========
-========         .----------------------.   | === |          ========
-========         |.-""""""""""""""""""-.|   |-----|          ========
-========         ||                    ||   | === |          ========
-========         ||   KICKSTART.NVIM   ||   |-----|          ========
-========         ||                    ||   | === |          ========
-========         ||                    ||   |-----|          ========
-========         ||:Tutor              ||   |:::::|          ========
-========         |'-..................-'|   |____o|          ========
-========         `"")----------------(""`   ___________      ========
-========        /::::::::::|  |::::::::::\  \ no mouse \     ========
-========       /:::========|  |==hjkl==:::\  \ required \    ========
-========      '""""""""""""'  '""""""""""""'  '""""""""""'   ========
-========                                                     ========
-=====================================================================
-=====================================================================
-
-What is Kickstart?
-
-  Kickstart.nvim is *not* a distribution.
-
-  Kickstart.nvim is a starting point for your own configuration.
-    The goal is that you can read every line of code, top-to-bottom, understand
-    what your configuration is doing, and modify it to suit your needs.
-
-    Once you've done that, you can start exploring, configuring and tinkering to
-    make Neovim your own! That might mean leaving Kickstart just the way it is for a while
-    or immediately breaking it into modular pieces. It's up to you!
-
-    If you don't know anything about Lua, I recommend taking some time to read through
-    a guide. One possible example which will only take 10-15 minutes:
-      - https://learnxinyminutes.com/docs/lua/
-
-    After understanding a bit more about Lua, you can use `:help lua-guide` as a
-    reference for how Neovim integrates Lua.
-    - :help lua-guide
-    - (or HTML version): https://neovim.io/doc/user/lua-guide.html
-
-Kickstart Guide:
-
-  TODO: The very first thing you should do is to run the command `:Tutor` in Neovim.
-
-    If you don't know what this means, type the following:
-      - <escape key>
-      - :
-      - Tutor
-      - <enter key>
-
-    (If you already know the Neovim basics, you can skip this step.)
-
-  Once you've completed that, you can continue working through **AND READING** the rest
-  of the kickstart init.lua.
-
-  Next, run AND READ `:help`.
-    This will open up a help window with some basic information
-    about reading, navigating and searching the builtin help documentation.
-
-    This should be the first place you go to look when you're stuck or confused
-    with something. It's one of my favorite Neovim features.
-
-    MOST IMPORTANTLY, we provide a keymap "<space>sh" to [s]earch the [h]elp documentation,
-    which is very useful when you're not exactly sure of what you're looking for.
-
-  I have left several `:help X` comments throughout the init.lua
-    These are hints about where to find more information about the relevant settings,
-    plugins or Neovim features used in Kickstart.
-
-   NOTE: Look for lines like this
-
-    Throughout the file. These are for you, the reader, to help you understand what is happening.
-    Feel free to delete them once you know what you're doing, but they should serve as a guide
-    for when you are first encountering a few different constructs in your Neovim config.
-
-If you experience any errors while trying to install kickstart, run `:checkhealth` for more info.
-
-I hope you enjoy your Neovim journey,
-- TJ
-
-P.S. You can delete this when you're done too. It's your config now! :)
---]]
-
--- Set <space> as the leader key
--- See `:help mapleader`
 --  NOTE: Must happen before plugins are loaded (otherwise wrong leader will be used)
 vim.g.mapleader = ' '
 vim.g.maplocalleader = ' '
 
--- Set to true if you have a Nerd Font installed and selected in the terminal
+-- set to true if nerd font installed and selected in the terminal
-vim.g.have_nerd_font = false
+vim.g.have_nerd_font = true
 
--- [[ Setting options ]]
+-- line numbers
--- See `:help vim.o`
--- NOTE: You can change these options as you wish!
---  For more options, you can see `:help option-list`
-
--- Make line numbers default
 vim.o.number = true
--- You can also add relative line numbers, to help with jumping.
+vim.o.relativenumber = true
---  Experiment for yourself to see if you like it!
--- vim.o.relativenumber = true
 
--- Enable mouse mode, can be useful for resizing splits for example!
+-- enable mouse mode, can be useful for resizing splits for example!
 vim.o.mouse = 'a'
 
 -- Don't show the mode, since it's already in the status line
@@ -118,47 +23,44 @@ vim.schedule(function()
   vim.o.clipboard = 'unnamedplus'
 end)
 
--- Enable break indent
+-- Tab size
+vim.o.tabstop = 3
+vim.o.shiftwidth = 3
+
+-- enable break indent
 vim.o.breakindent = true
 
--- Save undo history
+-- save undo history
 vim.o.undofile = true
 
--- Case-insensitive searching UNLESS \C or one or more capital letters in the search term
+-- case-insensitive searching UNLESS \C or one or more capital letters in the search term
 vim.o.ignorecase = true
 vim.o.smartcase = true
 
--- Keep signcolumn on by default
+-- keep signcolumn on by default
 vim.o.signcolumn = 'yes'
 
--- Decrease update time
+-- decrease update time
 vim.o.updatetime = 250
 
--- Decrease mapped sequence wait time
+-- decrease mapped sequence wait time
 vim.o.timeoutlen = 300
 
--- Configure how new splits should be opened
+-- configure how new splits should be opened
 vim.o.splitright = true
 vim.o.splitbelow = true
 
--- Sets how neovim will display certain whitespace characters in the editor.
+-- sets how neovim will display certain whitespace characters in the editor.
---  See `:help 'list'`
---  and `:help 'listchars'`
---
---  Notice listchars is set using `vim.opt` instead of `vim.o`.
---  It is very similar to `vim.o` but offers an interface for conveniently interacting with tables.
---   See `:help lua-options`
---   and `:help lua-options-guide`
 vim.o.list = true
 vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' }
 
--- Preview substitutions live, as you type!
+-- preview substitutions live, as you type!
 vim.o.inccommand = 'split'
 
--- Show which line your cursor is on
+-- show which line your cursor is on
 vim.o.cursorline = true
 
--- Minimal number of screen lines to keep above and below the cursor.
+-- minimal number of screen lines to keep above and below the cursor.
 vim.o.scrolloff = 10
 
 -- if performing an operation that would fail due to unsaved changes in the buffer (like `:q`),
@@ -184,16 +86,15 @@ vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagn
 -- or just use <C-\><C-n> to exit terminal mode
 vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })
 
--- TIP: Disable arrow keys in normal mode
+-- Disable arrow keys in normal mode
--- vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
+vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
--- vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
+vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
--- vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
+vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
--- vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')
+vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')
 
--- Keybinds to make split navigation easier.
+-- keybinds to make split navigation easier.
---  Use CTRL+<hjkl> to switch between windows
+-- CTRL+<hjkl> to switch between windows
---
+-- `:help wincmd` for a list of all window commands
---  See `:help wincmd` for a list of all window commands
 vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' })
 vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' })
 vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
@@ -378,41 +279,20 @@ require('lazy').setup({
       },
       { 'nvim-telescope/telescope-ui-select.nvim' },
 
-      -- Useful for getting pretty icons, but requires a Nerd Font.
+      -- useful for getting pretty icons, but requires a Nerd Font.
       { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font },
     },
     config = function()
-      -- Telescope is a fuzzy finder that comes with a lot of different things that
-      -- it can fuzzy find! It's more than just a "file finder", it can search
-      -- many different aspects of Neovim, your workspace, LSP, and more!
-      --
       -- The easiest way to use Telescope, is to start by doing something like:
       --  :Telescope help_tags
       --
-      -- After running this command, a window will open up and you're able to
-      -- type in the prompt window. You'll see a list of `help_tags` options and
-      -- a corresponding preview of the help.
-      --
       -- Two important keymaps to use while in Telescope are:
       --  - Insert mode: <c-/>
       --  - Normal mode: ?
-      --
-      -- This opens a window that shows you all of the keymaps for the current
-      -- Telescope picker. This is really useful to discover what Telescope can
-      -- do as well as how to actually do it!
 
       -- [[ Configure Telescope ]]
       -- See `:help telescope` and `:help telescope.setup()`
       require('telescope').setup {
-        -- You can put your default mappings / updates / etc. in here
-        --  All the info you're looking for is in `:help telescope.setup()`
-        --
-        -- defaults = {
-        --   mappings = {
-        --     i = { ['<c-enter>'] = 'to_fuzzy_refine' },
-        --   },
-        -- },
-        -- pickers = {}
         extensions = {
           ['ui-select'] = {
             require('telescope.themes').get_dropdown(),
@@ -420,7 +300,7 @@ require('lazy').setup({
         },
       }
 
-      -- Enable Telescope extensions if they are installed
+      -- enable telescope extensions if they are installed
       pcall(require('telescope').load_extension, 'fzf')
       pcall(require('telescope').load_extension, 'ui-select')
 
@@ -482,9 +362,20 @@ require('lazy').setup({
       -- Automatically install LSPs and related tools to stdpath for Neovim
       -- Mason must be loaded before its dependents so we need to set it up here.
       -- NOTE: `opts = {}` is the same as calling `require('mason').setup({})`
-      { 'mason-org/mason.nvim', opts = {} },
+      {
+        'mason-org/mason.nvim',
+        opts = {
+          automatic_installation = true,
+        },
+      },
+
+      {
+        'WhoIsSethDaniel/mason-tool-installer.nvim',
+        opts = {
+          ensure_installed = {},
+        },
+      },
       'mason-org/mason-lspconfig.nvim',
-      'WhoIsSethDaniel/mason-tool-installer.nvim',
 
       -- Useful status updates for LSP.
       { 'j-hui/fidget.nvim', opts = {} },
@@ -661,40 +552,26 @@ require('lazy').setup({
       --  So, we create new capabilities with blink.cmp, and then broadcast that to the servers.
       local capabilities = require('blink.cmp').get_lsp_capabilities()
 
-      -- Enable the following language servers
-      --  Feel free to add/remove any LSPs that you want here. They will automatically be installed.
-      --
-      --  Add any additional override configuration in the following tables. Available keys are:
-      --  - cmd (table): Override the default command used to start the server
-      --  - filetypes (table): Override the default list of associated filetypes for the server
-      --  - capabilities (table): Override fields in capabilities. Can be used to disable certain LSP features.
-      --  - settings (table): Override the default settings passed when initializing the server.
-      --        For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/
       local servers = {
-        -- clangd = {},
+        -- Go
-        -- gopls = {},
+        gopls = {},
-        -- pyright = {},
+        golangci_lint_ls = {},
-        -- rust_analyzer = {},
-        -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs
-        --
-        -- Some languages (like typescript) have entire language plugins that can be useful:
-        --    https://github.com/pmizio/typescript-tools.nvim
-        --
-        -- But for many setups, the LSP (`ts_ls`) will work just fine
-        -- ts_ls = {},
-        --
 
+        -- Python
+        pyright = {},
+
+        -- Rust
+        rust_analyzer = {},
+
+        -- TypeScript / JavaScript
+        ts_ls = {},
+
+        -- Lua
         lua_ls = {
-          -- cmd = { ... },
-          -- filetypes = { ... },
-          -- capabilities = {},
           settings = {
             Lua = {
-              completion = {
+              completion = { callSnippet = 'Replace' },
-                callSnippet = 'Replace',
+              diagnostics = { globals = { 'vim' } },
-              },
-              -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings
-              -- diagnostics = { disable = { 'missing-fields' } },
             },
           },
         },
@@ -715,7 +592,12 @@ require('lazy').setup({
       -- for you, so that they are available from within Neovim.
       local ensure_installed = vim.tbl_keys(servers or {})
       vim.list_extend(ensure_installed, {
-        'stylua', -- Used to format Lua code
+        -- Lua
+        'stylua',
+
+        -- Go
+        'goimports',
+        'gofumpt',
       })
       require('mason-tool-installer').setup { ensure_installed = ensure_installed }
 
@@ -738,7 +620,7 @@ require('lazy').setup({
 
   { -- Autoformat
     'stevearc/conform.nvim',
-    event = { 'BufWritePre' },
+    event = { 'VimEnter' },
     cmd = { 'ConformInfo' },
     keys = {
       {
@@ -768,6 +650,7 @@ require('lazy').setup({
       end,
       formatters_by_ft = {
         lua = { 'stylua' },
+        go = { 'goimports', 'gofumpt' },
         -- Conform can also run multiple formatters sequentially
         -- python = { "isort", "black" },
         --
@@ -810,6 +693,7 @@ require('lazy').setup({
       },
       'folke/lazydev.nvim',
     },
+
     --- @module 'blink.cmp'
     --- @type blink.cmp.Config
     opts = {
@@ -876,28 +760,6 @@ require('lazy').setup({
     },
   },
 
-  { -- You can easily change to a different colorscheme.
-    -- Change the name of the colorscheme plugin below, and then
-    -- change the command in the config to whatever the name of that colorscheme is.
-    --
-    -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`.
-    'folke/tokyonight.nvim',
-    priority = 1000, -- Make sure to load this before all the other start plugins.
-    config = function()
-      ---@diagnostic disable-next-line: missing-fields
-      require('tokyonight').setup {
-        styles = {
-          comments = { italic = false }, -- Disable italics in comments
-        },
-      }
-
-      -- Load the colorscheme here.
-      -- Like many other themes, this one has different styles, and you could load
-      -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'.
-      vim.cmd.colorscheme 'tokyonight-night'
-    end,
-  },
-
   -- Highlight todo, notes, etc in comments
   { 'folke/todo-comments.nvim', event = 'VimEnter', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } },
 
@@ -938,20 +800,17 @@ require('lazy').setup({
       --  Check out: https://github.com/echasnovski/mini.nvim
     end,
   },
+
+  -- [[ Configure Treesitter ]] See `:help nvim-treesitter`
   { -- Highlight, edit, and navigate code
     'nvim-treesitter/nvim-treesitter',
     build = ':TSUpdate',
-    main = 'nvim-treesitter.configs', -- Sets main module to use for opts
+    main = 'nvim-treesitter.configs',
-    -- [[ Configure Treesitter ]] See `:help nvim-treesitter`
     opts = {
       ensure_installed = { 'bash', 'c', 'diff', 'html', 'lua', 'luadoc', 'markdown', 'markdown_inline', 'query', 'vim', 'vimdoc' },
-      -- Autoinstall languages that are not installed
       auto_install = true,
       highlight = {
         enable = true,
-        -- Some languages depend on vim's regex highlighting system (such as Ruby) for indent rules.
-        --  If you are experiencing weird indenting issues, add the language to
-        --  the list of additional_vim_regex_highlighting and disabled languages for indent.
         additional_vim_regex_highlighting = { 'ruby' },
       },
       indent = { enable = true, disable = { 'ruby' } },
@@ -964,32 +823,41 @@ require('lazy').setup({
     --    - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects
   },
 
-  -- The following comments only work if you have downloaded the kickstart repo, not just copy pasted the
+  {
-  -- init.lua. If you want these files, they are in the repository, so you can just download them and
+    'navarasu/onedark.nvim',
-  -- place them in the correct locations.
+    priority = 1000, -- make sure to load this before all the other start plugins
+    config = function()
+      require('onedark').setup {
+        style = 'light',
+        code_style = {
+          comments = 'none',
+        },
+        transparent = true,
+      }
+
+      -- Enable theme
+      require('onedark').load()
+
+      -- Override matchparen highlight
+      vim.api.nvim_create_autocmd('ColorScheme', {
+        pattern = '*',
+        callback = function()
+          vim.api.nvim_set_hl(0, 'MatchParen', { fg = '#000000', bg = '#E6F0FC' })
+          vim.api.nvim_set_hl(0, 'Visual', { fg = '#000000', bg = '#A8C6F4' })
+        end,
+      })
+    end,
+  },
 
-  -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for Kickstart
-  --
-  --  Here are some example plugins that I've included in the Kickstart repository.
-  --  Uncomment any of the lines below to enable them (you will need to restart nvim).
-  --
   -- require 'kickstart.plugins.debug',
-  -- require 'kickstart.plugins.indent_line',
+  require 'kickstart.plugins.indent_line',
-  -- require 'kickstart.plugins.lint',
+  require 'kickstart.plugins.lint',
-  -- require 'kickstart.plugins.autopairs',
+  require 'kickstart.plugins.autopairs',
-  -- require 'kickstart.plugins.neo-tree',
+  require 'kickstart.plugins.neo-tree',
-  -- require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps
+  require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps
 
-  -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
+  -- custom plugins ("lua/custom/plugins/*.lua")
-  --    This is the easiest way to modularize your config.
+  { import = 'custom.plugins' },
-  --
-  --  Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going.
-  -- { import = 'custom.plugins' },
-  --
-  -- For additional information with loading, sourcing and examples see `:help lazy.nvim-🔌-plugin-spec`
-  -- Or use telescope!
-  -- In normal mode type `<space>sh` then write `lazy.nvim-plugin`
-  -- you can continue same window with `<space>sr` which resumes last telescope search
 }, {
   ui = {
     -- If you are using a Nerd Font: set icons to an empty table which will use the

lua/custom/plugins/drp.lua

@@ -0,0 +1,25 @@
+return {
+  {
+    'andweeb/presence.nvim',
+    lazy = false,
+    config = function()
+      require('presence').setup {
+        auto_update = true,
+        neovim_image_text = '(•̀⤙•́)',
+        main_image = 'file', -- ("neovim" or "file")
+        debounce_timeout = 10,
+        enable_line_number = true,
+        buttons = true,
+        show_time = true,
+
+        editing_text = 'Editing %s',
+        file_explorer_text = 'Browsing %s',
+        git_commit_text = 'Committing changes',
+        plugin_manager_text = 'Managing plugins',
+        reading_text = 'Reading %s',
+        workspace_text = 'Working on %s',
+        line_number_text = 'Line %s out of %s',
+      }
+    end,
+  },
+}

lua/custom/plugins/init.lua

@@ -1,5 +0,0 @@
--- You can add your own plugins here or in other files in this directory!
---  I promise not to create any merge conflicts in this directory :)
---
--- See the kickstart.nvim README for more information
-return {}